[NHRC-user] NHRC-4/M2 no audio
Jeff Otterson
jeff at nhrc.net
Wed Oct 8 21:45:47 EDT 2003
Hi,
On a station we recommend using a jumper on the radio "door" to bring TX
audio to the transmitter.
For your setup, I suggest signal tracing with an oscilloscope or
amplified speaker.
Let me know if you can't get it working...
Jeff
At 08:27 PM 10/8/2003, you wrote:
>Greetings. I am installing a NHRC-4/M2 in a Mastr ll repeater (not a
>converted mobile!) I have the CAS coming from pin 9 on J904 & Mic high &
>Mic low connected at the rear of the repeater (there are various
>connections here for PTT, mic audio, speaker audio etc.......) The red ptt
>led comes on the controller when I key up the repeater as does the green
>cas led. The yellow dtmf led also comes on when I send touch tones. BUT I
>am getting no audio at all.......any ideas????????
>I don't know if this will be enough info, but any help would be
>appreciated......THX
>Darin
More information about the NHRC-user
mailing list