[Coco] looking for latest toolshed location

[Bill Pierce]

Gene, I never really thought about the setup file. The actual distro within is multiplatform (I think). I'll have to zip up a package without the setup.
This version needs no cmd line stuff like allocating memory or whatever. It "just works". It's also multi-instance. I was running 3 Cocos and 2 emulators from one server, sharing disk images across all machines. To run, you definitely need to read the blog on my site. It's a little different from the original, so setup is different.
 
 
 
-----Original Message-----
From: Gene Heskett <gheskett at shentel.net>
To: coco <coco at maltedmedia.com>
Sent: Fri, Nov 29, 2019 5:52 pm
Subject: Re: [Coco] looking for latest toolshed location

On Friday 29 November 2019 17:12:22 Bill Pierce via Coco wrote:

> The version of DriveWire that's on my site is not the latest. It's
> actually the same as the latest on Aaron's on CocoCoding (4.3.3o
> w/4.3.3p as update). The difference is the GUI as they both use the
> same core. The GUI on 4.3.4e (not 4.4.4e), is geared more for software
> developers and has a couple of special features. It's also missing a
> few GUI features from the official release. Aaron never finish 4.3.4e
> as he decided to rewrite the whole code. It was at about that time he
> dropped out of the Coco Community. As I said, they both use the same
> core jar file, the difference is in the GUI.
>
Except now you have only setup.exe's on your site Bill. I'm running linux 
and that is not open for discussion. And sourceforge has removed access 
to the src tarball for nitros9, so all I can get from their site 
is .dsk's.

Don't know about toolshed, I'm too upset right now to check.
>
>
> -----Original Message-----
> From: Robert Gault <robert.gault at att.net>
> To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
> Sent: Fri, Nov 29, 2019 4:22 pm
> Subject: Re: [Coco] looking for latest toolshed location
>
> Gene,
>
> Far as I know, the latest version of Drivewire4 is on Bill Pierce's
> site. https://sites.google.com/site/dabarnstudio/
> It should be v-4.4.4e
>
> Not sure if the version of NitrOS-9 matters but you can always get the
> latest from https://nitros9.sourceforge.io/snapshot/
>
> They seem to be current at about 11/16/2019 .
>
> Robert
>
> Gene Heskett wrote:
> > On Friday 29 November 2019 08:07:56 Robert Gault wrote:
> >> Gene and Walter,
> >>
> >> I just browsed the url below and it is active. New source
> >> corrections were as recent as "6 days ago".
> >>
> >> In any case, the Web page lists the date for each
> >> addition/correction so you can easily tell the state of Toolshed.
> >
> > Good, it would be a loss if it were to disappear. I should clean the
> > gime one more time and run that script again. Where can I get the
> > latest, working drivewire, and does it require the latest nitros9? 
> > I had to back up to the java version to make it work the last time.
> >
> > Thanks Robert.
> >
> >> Robert
> >>
> >> Gene Heskett wrote:
> >>> On Thursday 28 November 2019 23:25:07 Gene Heskett wrote:
> >>> <snip>
> >>> hg clone http://hg.code.sf.net/p/toolshed/code
> >>> <snip>
> >
> > Cheers, Gene Heskett
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco


Cheers, Gene Heskett
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/gene>

-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco