[Coco] What ever Happened to NineServer ?

Brett Gordon beretta42 at gmail.com
Mon Jun 4 19:57:46 EDT 2018


The normal java dw4 has done this for a long time (+5yrs).  Those little
terminals work fine in fuzix too.

On Jun 4, 2018 5:13 PM, "James Jones" <jejones3141 at gmail.com> wrote:

> Where can one download the drivewire version with nineserver?
>
> On Mon, Jun 4, 2018 at 1:52 PM, <coco at jechar.ca> wrote:
>
> > I thought those were just for MIDI so I had not installed them yet.
> > I will add them to my boot changeing references like N5 to Z5 perhaps the
> > Youtube refers to an older version where N is used rather then Z. I will
> > update you about my progress tomorrow.
> >
> >
> >
> > On 2018-06-04 13:16, Bill Pierce via Coco wrote:
> >
> >> If you are referring to just running a NitrOS9 terminal window on the
> >> PC with the Coco as the server using DW4, then yes, it's still there.
> >> First you need the "/Zx" desriptors along with the "scdwv.dr" (as well
> >> as normal dw boot stuff)
> >> Boot NitrOS9 with DW4 access. Type "shell /Zx&". x being the Z window
> >> number (Z1-Z8). And yes, include the ampersand.
> >> At this point, an 80x24 text window should appear on your PC in which
> >> you have access to the Coco & NitrOS9. You can run programs and such,
> >> but no graphics.
> >>
> >>
> >>
> >>
> >>
> >> Bill Pierce
> >> "Charlie stole the handle, and the train it won't stop going, no way
> >> to slow down!" - Ian Anderson - Jethro Tull
> >>
> >> My Music from the Tandy/Radio Shack Color Computer 2 & 3
> >> https://sites.google.com/site/dabarnstudio/
> >> Co-Contributor, Co-Editor for CocoPedia
> >> http://www.cocopedia.com/wiki/index.php/Main_Page
> >>
> >> E-Mail: ooogalapasooo at aol.com
> >>
> >>
> >>
> >>
> >>
> >> -----Original Message-----
> >> From: coco <coco at jechar.ca>
> >> To: Coco List <coco at maltedmedia.com>
> >> Sent: Mon, Jun 4, 2018 9:23 am
> >> Subject: [Coco] What ever Happened to NineServer ?
> >>
> >> I seem to remember popping a Nitros9 Window onto the drivewire server
> >> it was very neat. There is a Youtube video
> >> https://www.youtube.com/watch?v=7C-QvdX2bNQ  I cannot find the disk I
> >> had made that did than so I was trying to  do it again from the
> >> youtube video.  It does not work and I get a error 221 - Module not
> >> found.  I do have n5  Is Nine server still supported by drive wire, I
> >> herd a rummer that  that It was going to be a separate program.  I can
> >> use either Nitros9 3.02.9 or 3.03 - 2014 or 3.03 Daily Build  none of
> >> these have worked.  What modules do I need and what should be in my
> >> /dd/sys/inetd  to make this work or is it no longer  supported by
> >> drive wire?  If it is being developed as a separate program now who is
> >> the developer ?  Thanks.-- Coco mailing
> >> listCoco at maltedmedia.comhttps://pairlist5.pair.net/mailman/
> listinfo/coco
> >>
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > https://pairlist5.pair.net/mailman/listinfo/coco
> >
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>


More information about the Coco mailing list