[Coco] What ever Happened to NineServer ?

James Jones jejones3141 at gmail.com
Mon Jun 4 17:13:18 EDT 2018

Where can one download the drivewire version with nineserver?

On Mon, Jun 4, 2018 at 1:52 PM, <coco at jechar.ca> wrote:

> I thought those were just for MIDI so I had not installed them yet.
> I will add them to my boot changeing references like N5 to Z5 perhaps the
> Youtube refers to an older version where N is used rather then Z. I will
> update you about my progress tomorrow.
> On 2018-06-04 13:16, Bill Pierce via Coco wrote:
>> If you are referring to just running a NitrOS9 terminal window on the
>> PC with the Coco as the server using DW4, then yes, it's still there.
>> First you need the "/Zx" desriptors along with the "scdwv.dr" (as well
>> as normal dw boot stuff)
>> Boot NitrOS9 with DW4 access. Type "shell /Zx&". x being the Z window
>> number (Z1-Z8). And yes, include the ampersand.
>> At this point, an 80x24 text window should appear on your PC in which
>> you have access to the Coco & NitrOS9. You can run programs and such,
>> but no graphics.
>> Bill Pierce
>> "Charlie stole the handle, and the train it won't stop going, no way
>> to slow down!" - Ian Anderson - Jethro Tull
>> My Music from the Tandy/Radio Shack Color Computer 2 & 3
>> https://sites.google.com/site/dabarnstudio/
>> Co-Contributor, Co-Editor for CocoPedia
>> http://www.cocopedia.com/wiki/index.php/Main_Page
>> E-Mail: ooogalapasooo at aol.com
>> -----Original Message-----
>> From: coco <coco at jechar.ca>
>> To: Coco List <coco at maltedmedia.com>
>> Sent: Mon, Jun 4, 2018 9:23 am
>> Subject: [Coco] What ever Happened to NineServer ?
>> I seem to remember popping a Nitros9 Window onto the drivewire server
>> it was very neat. There is a Youtube video
>> https://www.youtube.com/watch?v=7C-QvdX2bNQ  I cannot find the disk I
>> had made that did than so I was trying to  do it again from the
>> youtube video.  It does not work and I get a error 221 - Module not
>> found.  I do have n5  Is Nine server still supported by drive wire, I
>> herd a rummer that  that It was going to be a separate program.  I can
>> use either Nitros9 3.02.9 or 3.03 - 2014 or 3.03 Daily Build  none of
>> these have worked.  What modules do I need and what should be in my
>> /dd/sys/inetd  to make this work or is it no longer  supported by
>> drive wire?  If it is being developed as a separate program now who is
>> the developer ?  Thanks.-- Coco mailing
>> listCoco at maltedmedia.comhttps://pairlist5.pair.net/mailman/listinfo/coco
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco

More information about the Coco mailing list