[Coco] CoCo3 FPGA project analog boards

[Dave Philipsen]

Just curious...would Tim Lindner have any experience with printed polycarbonate overlays like you might use on a control panel or arcade game?

Dave Philipsen

> On May 16, 2016, at 9:59 PM, Zippster <zippster278 at gmail.com> wrote:
> 
> Hi guys,
> 
> A little update.
> 
> I built one of the test boards tonight, so I should be able to get this tested over the next day
> or two, get a few small tweaks (positioning of the WiFi module mostly), and then get the
> run ordered.  They are taking about 1 week to get to me right now, so I should be able to start
> shipping boards in about 2 weeks or so assuming everything goes ok.
> 
> Tim Linder has offered to help me with getting some new top plates cut for our CoCo3 FPGAs.
> 
> Here's a pic of the sample top plate.  This should help tie everything into a finished looking package.
> New top plates along with a standoff kit will be included with the boards.
> 
> Pics…
> <https://drive.google.com/open?id=0B1sgl615FlGnX01MOEFSMnpXME0 <https://drive.google.com/open?id=0B1sgl615FlGnX01MOEFSMnpXME0>>
> <https://drive.google.com/open?id=0B1sgl615FlGnWVhBbFpEOGIwOFE <https://drive.google.com/open?id=0B1sgl615FlGnWVhBbFpEOGIwOFE>>
> 
> Sorry this is taking so long, but hopefully the results will be worth it.   :)
> 
> - Ed
> 
> 
>> On May 11, 2016, at 9:54 AM, Salvador Garcia via Coco <coco at maltedmedia.com> wrote:
>> 
>> 
>> Looks and feels just right!!!  
>> Salvador
> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco