[Coco] SDC oddness

[Zippster]

They fit very well in a variety of 1/2/3’s I have here, some are tighter than others though.

- Ed


> On Feb 8, 2015, at 9:39 AM, Joe Grubbs <jsgrubbs at hotmail.com> wrote:
> 
> For what it's worth, Tim's case fits really really snug in the cart slot of my CoCo2. Maybe he made a change in the length of the standoffs?
> 
> 
> 
>> Date: Sun, 8 Feb 2015 10:33:30 -0500
>> From: snhirsch at gmail.com
>> To: coco at maltedmedia.com
>> Subject: Re: [Coco] SDC oddness
>> 
>> On Sun, 8 Feb 2015, Zippster wrote:
>> 
>>> My guess would be either somewhat poor contact in the card slot (most 
>>> likely), or flash socket (much less likely).
>> 
>>> Is the SDC in a case?  It really helps keep the contacts in place when 
>>> plugged in. You could place (wedge) something underneath it in the cart 
>>> port to keep it aligned and see if that helps.
>> 
>> Yes, it is in one of Tim's nice plexi cases.  Unfortunately, the PCB mount 
>> arrangement allows the SDC edge connector to extend about 1/4" too far 
>> from the case.  The "legs" of the case are then too short to stabilize it 
>> in the expansion slot.  If there's ever another run of these made, it 
>> would be good to change that.
>> 
>> I'll try wedging something in there.
>> 
>> Steve
>> 
>> 
>> -- 
>> 
>> -- 
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
> 		 	   		  
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco