[Coco] SDC oddness

[Joe Grubbs]

For what it's worth, Tim's case fits really really snug in the cart slot of my CoCo2. Maybe he made a change in the length of the standoffs?



> Date: Sun, 8 Feb 2015 10:33:30 -0500
> From: snhirsch at gmail.com
> To: coco at maltedmedia.com
> Subject: Re: [Coco] SDC oddness
> 
> On Sun, 8 Feb 2015, Zippster wrote:
> 
> > My guess would be either somewhat poor contact in the card slot (most 
> > likely), or flash socket (much less likely).
> 
> > Is the SDC in a case?  It really helps keep the contacts in place when 
> > plugged in. You could place (wedge) something underneath it in the cart 
> > port to keep it aligned and see if that helps.
> 
> Yes, it is in one of Tim's nice plexi cases.  Unfortunately, the PCB mount 
> arrangement allows the SDC edge connector to extend about 1/4" too far 
> from the case.  The "legs" of the case are then too short to stabilize it 
> in the expansion slot.  If there's ever another run of these made, it 
> would be good to change that.
> 
> I'll try wedging something in there.
> 
> Steve
> 
> 
> -- 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco