[Coco] vcc and WIDTH command when using HDB-DOS

[Nick Marentes]

On 26/10/2014 9:09 AM, Robert Gault wrote:
> didier,
>
> You main problem is that you don't know how or are not correctly 
> describing how VCC should be used. Read the .pfd that comes with the 
> program.
>
> 1) You can't mount ROM or CART images in the VCC Cartridge panel. You 
> can only mount .dll files:fd502.dll, harddisk.dll, mpi.dll, orch90.dll
> 2) A basic VCC disk system requires mounting fd502.dll in Cartridge, 
> and setting FD-502 config for Disk Basic. There should not be any 
> problem using the WIDTH commands.
> 3) If you now set FD-502 config for external ROM and mount 
> hdbdw3bc3.rom, you will have DriveWire support. Again the WIDTH 
> commands should work.
>
> If you use the mpi.dll in Cartridge, then the other .dll get mounted 
> in the mpi slots.
>
> Robert

What Robert is saying is...

RTFM!   :)

Nick