[Coco] Vcc to DriveWire

[Bill Pierce]

Robert, you forgot to mention, not to use the "dw" labeled disks form the repo for emulators & dw4, use the ones ending in "becker". They are for the emulators and CocoFPGA.
 
Bill, if you want a Vcc1.4.3b/DW4/HDBDOS/Becker turnkey system let me know and I'll send you a link. I've just finished my website for it and will be uloading the files tonight.
 
The website is:
 
 https://sites.google.com/site/dabarnstudio/the-color-computer-drivewire4-hdbdos-nitros9-starter-kit

I should have the download links up tonight.
 

Bill Pierce
"Today is a good day... I woke up" - Ritchie Havens
 

My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Webmaster of The TRS-80 Color Computer Archive
http://www.colorcomputerarchive.com/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
E-Mail: ooogalapasooo at aol.com


 
 
-----Original Message-----
From: Robert Gault <robert.gault at att.net>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Sat, May 17, 2014 5:36 pm
Subject: Re: [Coco] Vcc to DriveWire


CoCoList for Color Computer Enthusiasts wrote:
> Ok I would like to know what I need in the boot file for Drivewire to VCC.  I 
have Drivewire setup for emulators, but need to know what I need to add/change 
in my boot file to use it.  I am using v3.3.0 Nitros9 6309 with a 60mb vhd and 3 
80trk ds drives with vcc now, using rb1773 and emudsk. Also using stock Disk 
rom.  I am green to drive wire and would like to start using it. Any help would 
be appreciated.
>
> Bill Nobel
>
>

There are two versions of VCC and only one will work with Drivewire. You need 
VCC 1.43beta with Becker support which is specifically designed for use with 
Drivewire.
http://www.colorcomputerarchive.com/coco/Emulators/Coco%203/Vcc/Vcc_setup%201.43b%20with%20Becker%20Port%20support.zip

http://www.colorcomputerarchive.com/coco/Emulators/Coco%203/Vcc/

This version of VCC will come with a ROM that supports Drivewire. Now if you 
want to access Drivewire disks after booting from your current .vhd drive using 
the RGBDOS ROM, you will need to add the Drivewire driver and descriptors to 
your OS9Boot file or load them as a merged file after booting NitrOS-9. I'm not 
sure the latter will work but expect it will. The alternative is booting 
NitrOS-9 from Drivewire using a v3.3.0 disk marked Becker with emudsk driver and 

descriptors added to that OS9Boot file.

The disks you need are at the nightly build repository.
http://nitros9.sourceforge.net/latest/

If you have problems getting things to work, you could send me direct email.

Robert
robert.gault at att.net


-- 
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco