[Coco] RadioShack closing 1100 stores

cyberpunk at prtc.net cyberpunk at prtc.net
Wed Mar 5 14:37:17 EST 2014


I seriously doubt that they can recover their long lost niche now largely covered by Tiger. Quoting from the 80's "They are going to need a bigger boat, err store!" :-) 
--
Sent from  myMail app for Android
Tuesday, 04 March 2014, 11:45PM -0400 from "Kip Koon" <computerdoc at sc.rr.com>:
Hi Rogelio!
Right on my friend!  Radio Shack needs to get back to what they did best -
Electronic Parts and Computers of various types.  FPGA Development kits
maybe and CPLD Kits too.  We all will of course always need electronic parts
if they'd just price those things decently.  Heck I cut my electronic teeth
on the 150 in 1 Electronics Project Kit in my youth.  I remember bugging my
family with an audio oscillator I built with it.  I had to replace a general
purpose transistor a little while later as well.  I think it was a PNP
Transistor if memory serves.  Those were the days!
Kip
From:  coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com] On
Behalf Of Rogelio Perea
Sent: Tuesday, March 04, 2014 10:12 PM
On Tue, Mar 4 2014, Ward Griffiths wrote:
> I do all my hobbyist shopping at Micro-Center these days (except last
> year when I was leaving north Jersey for New Hampshire at 4AM and had
> to stop at WalMart and spend more for less on a couple things I'd
> found I needed), but not everybody has one of those stores only ten
> miles away.  (Only absolute necessities because WalMart in Jersey
> charges 7% sales tax, in New Hampshire they charge 0%).  (The Paterson
> Micro-Center has an "Urban Enterprise Zone" deal with with the state
> so the sales tax is only 3.5%)(of the probably $30k I've spent there
> on gear for me, for my late wife and for my boss [that last using his
> card with his permission, as Hurricane Sandy did a lot of damage
> around the office, and tower PCs on the floor do not react well to a foot
of brackish water]).
>
One of the best ones close to Staten Island is Green Brook Electronics,
about half an hour away... dirty, disorganized, grumpy counter employees but
it has a lot of stuff as a well stocked electronics store should have.
Have another smaller electronics shop inside a Canal Street Chinese trinkets
store, just a hop from the subway ride home from work.
Have to note that my local RS store saved the day when my Weller soldering
station broke down in the midst of a prototype run for the MC-10 disk
controller (Darren Atkinson's design). If it had not been for that store I
would have had to mail order a replacement, ended up getting a better Weller
unit and at a not bad price. Lately I started building up my spare parts
cabinet and found a few bundled component kits on RS.
Also agree that RS should not have put all its eggs on the cell phone
basket. Back in 2006 I worked part time at an Edison NJ store - lasted only
3 months quitting a couple of days after that year's black Friday. I hated
selling cell phones and related accessories, my focus was on trying to
spruce up the components, kits, scanners and radios section which were
neglected to no end with the blessing of the District Manager... the only
thing in sight was selling cellphones no matter what. Now it is confirmed it
was a short sighted initiative from the top honchos in Texas. I remember one
of the biggest scandals that year being the one about one of the chief
officers getting caught lying about his credentials; when things are as
spoiled as they were a the top, what hope did the stores had with those
people fronting the big decisions?
These days just for kicks I will take my pocket computers and Models
100/200 to the stores whenever the time comes to buy batteries for them,
just for the oooohhhs and aaahhhs the things get from most of the employees
:-)
-- RP
--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco
--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco


More information about the Coco mailing list