[Coco] SuperIDE backup/restore

Sun Jul 28 23:48:22 EDT 2013

Ed,

I'm having a very similar problem with my SuperIDE. I have the 256GB
original Cloud 9 card, and I would like to backup it an work from a copy.

Initially I used one of 4GB Transcend Card. I DD the content from the
original Cloud-9 to it. I could boot it, but when I run som problems, the
computer hangs.

I tried both on a CoCo 2 and a CoCo 3 with the very same results. Original
OK, copy bad.

For example, everytime I ran Calixto Island, I got some vertical black bars
on the credit screen (I sent the pictures from the list two weeks ago), and
the games went crazy when I start.

Then I bought a 512MB and a 256MB card. They're not easy to find theese
days ...

When I copied to the 512MB I got the very same vertical bars and those
strange behaviour. With the 256MB card everything went fine. I`m using it!

I tried everything (with some help from Retrocanada) to use the 4GB and the
512MB card with no luck. I also have a Powerpak, a 8 bit Nintendo cartridge
that reads the ROM from a CF card. The 512MB card is not recognized on
powerpak either.

BTW, the card works perfectly on a Linux, a Mac or a windows machine.

There is something very, very strange in the way CF cards works. Who is the
culprit? The CF card's IDE emulation? Maybe ... but why does it works on
Intel Systems? SuperIDE? Maybe but why it hasn't worked on Powerpak either?
HDB-DOS way of accessing the information? Maybe ... but this doesn't makes
sense, since it only uses sector count. Everything together? Maybe ...
Ghosts from 80`s haunting your old CoCo? Maybe ...

I just bought two more 256 CF cards. I'll post as soon as I have more
information.

Up to now the best way to backup your data is saving your data on a
Drivewire disks using wired. But it takes time *and* patience.

Keep us informed. I`ll keep you informed as soon as I have more info.

Good luck!

On Sun, Jul 28, 2013 at 6:04 PM, Ed Orbea <ed.orbea at gmail.com> wrote:

> List Members
>
> My goal is to be able to backup and restore my SuperIDE CF Card.I could
> copy each HDB-DOS virtual drive to physical floppies (and then copy them to
> DSK image files).
>
> I could use dsave and make copies of the contents of the various NitrOS-9
> directories and sub directories to physical floppies (and then copy them to
> DSK image files).
>
> But why do I need to do that?
>
> I "should" be able to use (via WinXP) the 'dd' utility from Cygwin or the
> Win32DI application or WinHex (from X-Ways software) or Disk Imager (by
> Roadkil.net) to extract an image of the entire CF drive and then restore it.
>
> In order to try to do this, I purchased several 256mg CF cards (which I
> have referenced in previous posts).
>
> I successfully used the above listed utilities to extract an image from my
> Cloud9 distribution card.
>
> I generated as MD5 hash for each image (after it was extracted from the CF
> card) and all hash codes were identical.
>
> I tried several different CF card (that Mark was kind enough to test for
> me, as I have been struggling with this for several weeks).
>
> The 'target' CF cards are all identical to the Cloud9 distribution CF card
> according to that is shown via the IDEPROBE utility contained on the
> Clloud9 distribution disk
>
>    Logical cylinders: 980
>
>    Logical heads: 16
>
>    Logical sectors: 32
>
>    Total sectors: 501760
>
>    LBA: Is Supported
>
>    PIO Timing: 2
>
> The only differences are the Serial Number (obviously this should be
> different) and the # sectors per R/W multiple(Cloud9 distribution disk = 1,
> the other CF cards = 4).
>
> So, I should be able to "extract" the image from the Cloud9 distribution
> CF card and "restore" it to any of the 'matching' CF cards.
>
> The problem is that I can't. And let me explain further.
>
>    I can extract the image (without any failures or errors)
>
>    I can generate a MD5 has of the actual CF card and the extracted
>    image, and they match. That tells me that I do not have to do a
>    byte-by-byre comparison, as the image is an exact copy of the card.
>
>    I can then restore the image to one of the other CF cards without
>    encountering an error or failure
>
>    I can then generate a MD5 hash of the new CF cards and that hash
>    matches what has previously generated.
>
>    But when I put the new CF card into the SuperIDE device and power on
>    the system (CoCo3), I see the Disk Basic banner, the HBD-DOS LBA
>    banner, and then the system either: starts showing 'sparklies';
>    starts showing random colors and letters; or just hangs.
>
>    The LED on the SuperIDE remains a solid color (no blinking).
>
> I have tried using only the SuperIDE cartridge (no MPI)
>
> I have tried various MPI configurations/combinations.
>
> Everything works correctly, when I am using the Cloud9 distribution card
> and doesn't work when using the new CF card
>
> My CoCo system (as mentioned in previous posts) is:
>
>    CoCo3 (6809)
>
>    Cloud9 Triad memory upgrade
>
>    Roy's VGA converted
>
>    MPI with slot 4 (either Disto SCII FDCC with DW3 in Eprom OR TRS-80
>    26-3129 'long' FDCC); Slot 3 Orch-90; Slot 2 Modified SSC; Slot 1
>    SuperIDE.
>
> Your help is appreciated
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/**mailman/listinfo/coco<http://five.pairlist.net/mailman/listinfo/coco>
>