[Coco] The ultimate VCC hard disk image using EmuDsk

[Richard E. Crislip]

On Thu, 12 Nov 2015 13:32:26 -0500
Salvador Garcia <ssalvadorgarcia at netscape.net> wrote:

> I was curious, so I downloaded the ZIP file. 
> 
> 
> The txt file says type in DOS 255.
> 
> 
> I started Vcc, mounted the image on HD0 and entered the above command.
> 
> 
> I got ?SN error
> 
> 
> This is my first venture into doing anything with Vcc and I basically
> guessed at the above steps.
> 
> 
> Is there a guide that I can follow so that I won't be completely lost?
> 
> 
> After DOS 255 works, what then? Any references to material that I
> read up on would be helpful.
> 
> 
> Barry, thanks for putting this together. I have no clue what I am
> getting into, but am excited about it. :-)
> 
> 
> Thanks!
> Salvador
> 
> 
> 
> 
> -----Original Message-----
> From: Barry Nelson <barry.nelson at amobiledevice.com>
> To: coco <coco at maltedmedia.com>
> Sent: Thu, Nov 12, 2015 9:51 am
> Subject: Re: [Coco] The ultimate VCC hard disk image using EmuDsk
> 
> 
> The latest version of this disk image is now available from
> http://www.colorcomputerarchive.com/
> 
> The link directly to the page is
> http://www.colorcomputerarchive.com/coco/Virtual%20Hard%20Drives/NitrOS-9%20L2%20V3.3.0/
> 
> This
> hard disk image should work with either VCC or MESS. It boot using
> the EMUDisk driver, and so does not require a DriveWire server to
> run. It will NOT boot on a real CoCo, nor will it boot from
> DriveWire, however, it can be mounted as a second disk and the
> programs can be run. If there is interest, I could make a CoCo SDC
> and/or a Glenside IDE version.
> 

That should be DOS255 no space.