[Coco] The ultimate VCC hard disk image using EmuDsk

[Salvador Garcia]

I was curious, so I downloaded the ZIP file. 


The txt file says type in DOS 255.


I started Vcc, mounted the image on HD0 and entered the above command.


I got ?SN error


This is my first venture into doing anything with Vcc and I basically guessed at the above steps.


Is there a guide that I can follow so that I won't be completely lost?


After DOS 255 works, what then? Any references to material that I read up on would be helpful.


Barry, thanks for putting this together. I have no clue what I am getting into, but am excited about it. :-)


Thanks!
Salvador




-----Original Message-----
From: Barry Nelson <barry.nelson at amobiledevice.com>
To: coco <coco at maltedmedia.com>
Sent: Thu, Nov 12, 2015 9:51 am
Subject: Re: [Coco] The ultimate VCC hard disk image using EmuDsk


The latest version of this disk image is now available from
http://www.colorcomputerarchive.com/

The link directly to the page is
http://www.colorcomputerarchive.com/coco/Virtual%20Hard%20Drives/NitrOS-9%20L2%20V3.3.0/

This
hard disk image should work with either VCC or MESS. It boot using the EMUDisk
driver, and so does not require a DriveWire server to run. It will NOT boot on a
real CoCo, nor will it boot from DriveWire, however, it can be mounted as a
second disk and the programs can be run. If there is interest, I could make a
CoCo SDC and/or a Glenside IDE version.

-- 
Coco mailing
list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco