[Coco] Re: collecting info for converter

[Richard E. Crislip]

Hello Sylvain

Well I can't help you. I used to have a DB23 to DB9 adaptor, but I can not
locate it at the moment. Since I already have an Amiga version of Roy's
product, I really do not need it any more. So if I can locate it, it will be
yours.

On 02/08/2006, Sylvain Rousseau wrote:
> Hello Roy,
>
> This is the pinout for the video connector of an Amiga 
> 500/600/1000/1200/2000/3000 and 4000.  I got it at 
> http://pinouts.ru/data/AmigaVideo_pinout.shtml
> and the connector is a ?/%$?# DB23, yes a DB23 male and I don't know
> where  I can find one.  I can hack my A2000 to add it an other
> connector to test  the RGB to VGA
> adapter and I'm willing to do it but I prefer to use a DB23 if I can
> find one.
>
> Pin     Name            Description
> 1       /XCLK           Extern Clock
> 2       /XCLKEN         Extern Clock Enable (47 Ohm)
> 3       RED             Analog Red (75 Ohm)
> 4       GREEN   Analog Green (75 Ohm)
> 5       BLUE            Analog Blue (75 Ohm)
> 6       DI              Digital Intensity (47 Ohm)
> 7       DR              Digital Red (47 Ohm)
> 8       DG              Digital Green (47 Ohm)
> 9       DB              Digital Blue (47 Ohm)
> 10      /CSYNC  Composite Sync (47 Ohm)
> 11      /HSYNC  Horizontal Sync (47 Ohm)
> 12      /VSYNC  Vertical Sync (47 Ohm)
> 13      GNDRTN  Digital Ground (for /XCLKEN) Don"t connect with pin
> 16-20. 14      /PIXELSW        Genlock overlay (47 Ohm)
> 15      /C1             Clock out (47 Ohm)
> 16      GND             Video Ground for RED Analog (useful to know
> because  some TVs need specific grounds for specific colors when using
> SCART/PERITEL  SECAM video signal)
> 17      GND             Video Ground for GREEN Analog
> 18      GND             Video Ground for BLUE Analog
> 19      GND             Video Ground for CHV SYNC
> 20      GND             Video Ground
> 21*     -12V            -12 Volts DC (10 mA max) (A500/A600/A1200)
> 21*     -5V             -5 Volts DC (10 mA max)
> (A1000/A2000/A3000/A4000) 22      +12V            +12 Volts DC (100 mA
> max) 23      +5V             +5 Volts DC (100 mA max)
>
> Sylvain
>
> At 14:25 2006-02-08, RJRTTY at aol.com wrote:
>
>>In a message dated 2/8/06 1:11:02 P.M. Eastern  Standard Time,
>>srousseau at comlab.com writes:
>> >Hello Roy,
>>
>> >I  should be on the list to buy you a
>> > RGB to VGA adapter for my  Coco.
>>
>> >Also, I have an Amiga 2000.  When I
>> > got the  adapter I am willing to try it
>> >with the Amiga and give you some
>> >feedback on the mailing list.
>>
>> >Sylvain
>>
>>Thanks for the  offer.    You are on the
>>list at about 3 weeks down.
>>
>>I  would need to know the type of connector
>>and pinout configuration the Amiga  uses.
>>
>>thanks
>>Roy
>>
>>
>>--
>>Coco mailing list
>>Coco at maltedmedia.com
>>http://five.pairlist.net/mailman/listinfo/coco
>
>
Regards
-- 
Cruising on AutoPilot                        |
        With an Amiga           ---o-o-O-o-o---  and a CoCo