[Coco] collecting info for converter

[Sylvain Rousseau]

Hello Roy,

This is the pinout for the video connector of an Amiga 
500/600/1000/1200/2000/3000 and 4000.  I got it at 
http://pinouts.ru/data/AmigaVideo_pinout.shtml
and the connector is a ?/%$?# DB23, yes a DB23 male and I don't know where 
I can find one.  I can hack my A2000 to add it an other connector to test 
the RGB to VGA
adapter and I'm willing to do it but I prefer to use a DB23 if I can find one.

Pin     Name            Description
1       /XCLK           Extern Clock
2       /XCLKEN         Extern Clock Enable (47 Ohm)
3       RED             Analog Red (75 Ohm)
4       GREEN   Analog Green (75 Ohm)
5       BLUE            Analog Blue (75 Ohm)
6       DI              Digital Intensity (47 Ohm)
7       DR              Digital Red (47 Ohm)
8       DG              Digital Green (47 Ohm)
9       DB              Digital Blue (47 Ohm)
10      /CSYNC  Composite Sync (47 Ohm)
11      /HSYNC  Horizontal Sync (47 Ohm)
12      /VSYNC  Vertical Sync (47 Ohm)
13      GNDRTN  Digital Ground (for /XCLKEN) Don"t connect with pin 16-20.
14      /PIXELSW        Genlock overlay (47 Ohm)
15      /C1             Clock out (47 Ohm)
16      GND             Video Ground for RED Analog (useful to know because 
some TVs need specific grounds for specific colors when using SCART/PERITEL 
SECAM video signal)
17      GND             Video Ground for GREEN Analog
18      GND             Video Ground for BLUE Analog
19      GND             Video Ground for CHV SYNC
20      GND             Video Ground
21*     -12V            -12 Volts DC (10 mA max) (A500/A600/A1200)
21*     -5V             -5 Volts DC (10 mA max) (A1000/A2000/A3000/A4000)
22      +12V            +12 Volts DC (100 mA max)
23      +5V             +5 Volts DC (100 mA max)

Sylvain

At 14:25 2006-02-08, RJRTTY at aol.com wrote:

>In a message dated 2/8/06 1:11:02 P.M. Eastern  Standard Time,
>srousseau at comlab.com writes:
> >Hello Roy,
>
> >I  should be on the list to buy you a
> > RGB to VGA adapter for my  Coco.
>
> >Also, I have an Amiga 2000.  When I
> > got the  adapter I am willing to try it
> >with the Amiga and give you some
> >feedback on the mailing list.
>
> >Sylvain
>
>Thanks for the  offer.    You are on the
>list at about 3 weeks down.
>
>I  would need to know the type of connector
>and pinout configuration the Amiga  uses.
>
>thanks
>Roy
>
>
>--
>Coco mailing list
>Coco at maltedmedia.com
>http://five.pairlist.net/mailman/listinfo/coco