[NHRC-user] Fwd: Re: J1 repeater plug

[rick at harkins.net]

You should check the System Fusion list over on Yahoo. The current 

firmware in the DR1 is NOT friendly to external controllers. There have
been many discussions about this, including workarounds. The only
solutions are to lock the repeater in analog mode, or install a small
logic
board between the external controller and the repeater. This board from
Arcom allows the external controller to work in analog mode and the
internal controller in digital.

73,
Rick WØYGH

On Sat, Jul 25, 2015 at 7:33 AM, <k3cc at verizon.net> wrote:

> I used the female plug J1 for my old repeater.... Where can I find new plugs...... I have a new Yaesu Fusion repeater and I would like to use the NHRC-3-1 controller on the Yaesu repeater...... I have 2 Yaesu Fusion repeaters and I would like to link them together, can I use the NHRC-3-1 to accomplish this project ?? de Skip K3CC hams at k3cc.net _______________________________________________ NHRC-user mailing list NHRC-user at lists5.nhrc.net https://pairlist5.pair.net/mailman/listinfo/nhrc-user [1]

_______________________________________________
NHRC-user mailing list
NHRC-user at lists5.nhrc.net
https://pairlist5.pair.net/mailman/listinfo/nhrc-user [1]

 

Links:
------
[1] https://pairlist5.pair.net/mailman/listinfo/nhrc-user