[NHRC-user] NHRC-2 CW ID MIA

[Jeff Otterson]

Hi Bob,

   Do you know if your controller has the 16F628 or 16F84 processor?

   Regards,

   Jeff

   At 12:11 PM 1/12/2004, you wrote:
>Hiya and happy 2004!
>
>I'm running NHRC-2's for numerous repeater and link projects.  The controller
>that runs my GMRS repeater (462.575 PL114.8 if anyone is ever in New Orleans)
>has had, since its construction a weird problem:  after a widely variable 
>time
>period (sometimes minutes, sometimes months), the Morse ID stops 
>working.  The
>voice ID works fine and the CPU keeps the transmitter keyed for the time
>alloted for the CW ID (activated either by DTMF command or by interrupting 
>the
>voice ID), but there are no tones.  Power down then back up and the CW ID is
>back.  Since the repeater is 500 feet up a TV tower (elevator accessible, but
>still...), cycling the power is not a real cure.
>
>Thoughts?  Suggestions?  Recipes?
>
>--
>Bob Dunn
>K5IQ
>WPXA535
>www.qsl.net/k5iq
>_______________________________________________
>NHRC-user mailing list
>NHRC-user at nhrc.net
>http://two.pairlist.net/mailman/listinfo/nhrc-user