[Coco] RS-232 Pak problems

[rietveld rietveld]

2 questions

1. Will your setup be available for both bitbanger and rS232 paks.

2. Will your setup work with a coco1 or just a coco3



Sent from my BlackBerry Passport Red Edition.
  Original Message
From: Allen Huffman
Sent: Tuesday, February 6, 2018 9:06 PM
To: CoCoList for Color Computer Enthusiasts
Reply To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] RS-232 Pak problems


The end-result of all my experiments and research, in one blog post:

http://subethasoftware.com/2018/02/06/coco-rs-232-pak-to-3-wire-tx-rx-and-gnd-rs-232-device/

This is the minimum required to hook a 3-wire RS-232 device (TX, RX and GND) up to a Deluxe RS-232 Program Pak.

I noticed Greg-E-Term would operate with just DCD+DTR, but Ultimaterm and OS-9 terminal programs wanted DCD+DSR+DTR.

In all cases, RTS+CTS was necessary to make it work.

Feel free to comment at the blog site with any further corrections.

Lots of stuff coming down the pipeline with this…

                — A


--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco