[Coco] 225mhz VCC CoCo

[Walter Zambotti]

Yep.  It just changes the slider max!!!

-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Bill Pierce via Coco
Sent: Friday, 13 October 2017 11:57 AM
To: coco at maltedmedia.com
Cc: Bill Pierce <ooogalapasooo at aol.com>
Subject: Re: [Coco] 225mhz VCC CoCo

Ahhhh, for a minute there, I thought you were compiling a new version. The 4.2 release Joseph released before disappearing for so long had a higher clockrate than the sources he left us with or the open source project. The current max (from the config panel) is 89mhz, which I use almost constantly unless testing something for the real Coco3. Then I go to normal speed.
I think the value you are changing is the maximum multiplier, which is the same as moving the CPU speed in the config, but only with a higher multiplier.

 

 

Bill Pierce
"Charlie stole the handle, and the train it won't stop going, no way to slow down!" - Ian Anderson - Jethro Tull

My Music from the Tandy/Radio Shack Color Computer 2 & 3 https://sites.google.com/site/dabarnstudio/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page

E-Mail: ooogalapasooo at aol.com

 

 

-----Original Message-----
From: Walter Zambotti <zambotti at iinet.net.au>
To: 'CoCoList for Color Computer Enthusiasts' <coco at maltedmedia.com>
Sent: Thu, Oct 12, 2017 11:10 pm
Subject: Re: [Coco] 225mhz VCC CoCo

BillAny version!All you need to do is edit the vcc.ini file and change the following line:MaxOverClock=100To MaxOverClock=255Walter-----Original Message-----From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Bill Pierce via CocoSent: Friday, 13 October 2017 11:02 AMTo: coco at maltedmedia.comCc: Bill Pierce <ooogalapasooo at aol.com>Subject: Re: [Coco] 225mhz VCC CoCoWalter, my question is, where did you get the version of VCC that runs at 225mhz?  Bill Pierce"Charlie stole the handle, and the train it won't stop going, no way to slow down!" - Ian Anderson - Jethro TullMy Music from the Tandy/Radio Shack Color Computer 2 & 3 https://sites.google.com/site/dabarnstudio/Co-Contributor, Co-Editor for CocoPediahttp://www.cocopedia.com/wiki/index.php/Main_PageE-Mail: ooogalapasooo at aol.com  -----Original Message-----From: Walter Zambotti <zambotti at iinet.net.au>To: coco <coco at maltedmedia.com>Sent: Thu, Oct 12, 2017 8:15 pmSubject: [Coco] 225mhz VCC CoCoI'm lucky enough at the place where I work we have high spec gear comethrough. Tested VCC on a X299 i7-7820X 3.6GHZ. Set the clock to the max 225mhz and the frame rate still did not fall below62 fps! Woo hoo!!!-- Coco mailing listCoco at maltedmedia.comhttps://pairlist5.pair.net/mailman/listinfo/coco--Coco mailing listCoco at maltedmedia.comhttps://pairlist5.pair.net/mailman/listinfo/coco-- Coco mailing listCoco at maltedmedia.comhttps://pairlist5.pair.net/mailman/listinfo/coco

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco