[Coco] DE1 / DE2 boards

Dave Philipsen dave at davebiz.com
Mon Oct 3 14:39:07 EDT 2016


Salvador,

I believe that Gary has fixed the problem with the 'new' memory in his 
latest version.  That being said, I believe I have one DE1 board with 
the 'new' memory and one with the 'old' memory.

Dave


On 10/3/2016 10:06 AM, Salvador Garcia via Coco wrote:
> Thanks Dave!
> Personally, I am more interested in the DE1, with the modified RAM. I am a member of the Yahoo FPGA group, but honestly, with so much stuff going on right now, I have not seriously visited (I have have skimmed it though) the group ina while. At this time I do not know whether there is still a problem with the newer RAMs. If this has been resolved then I can do with a DE1 with the new RAM. If not resolved, then I definitely want to get one that has been modified. Regards, Salvador
>
>        From: Dave Philipsen <dave at davebiz.com>
>   To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
>   Sent: Friday, September 30, 2016 3:22 PM
>   Subject: Re: [Coco] DE1 / DE2 boards
>     
> Yes.  The DE2 boards have I/O connectors that are 100% compatible with
> the analog expansion board.  At this point I have not heard of anyone
> who has yet used the analog board on a DE2.  If you want to find out
> more come on over to the CoCo3FPGA group and ask either Gary or Leslie
> about this.  I believe Gary has a DE2 and since he is the author of
> CoCo3FPGA he might be able to shed a little more light on the subject.
> Leslie has ported Gary's code to the DE2 but the last time I heard any
> information about the port it was before the analog board was available.
>
> Dave
>
>
> On 9/30/2016 2:40 PM, Salvador Garcia via Coco wrote:
>> And another question:
>> Are the DE2 boards compatible with the analog expansion board?
>> And to pile on another question. I noticed that the is post is from June 2016. Is the information still valid?
>> Thanks!Salvador
>>
>>
>>          From: Torfinn Ingolfsen <tingox at gmail.com>
>>    To: coco at maltedmedia.com
>>    Sent: Friday, September 30, 2016 1:39 PM
>>    Subject: Re: [Coco] DE1 / DE2 boards
>>      
>> On 06/10/2016 06:15, Dave Philipsen wrote:
>>> By the way, in case anyone is interested, I have three used but in very
>>> good condition Terasic DE2s.  The DE2 is very similar to the DE1 except
>>> that it has an ethernet jack, a video DAC with more color depth, around
>>> 50% more logic elements, and a few other goodies. Checked out and ready
>>> to go with the latest DE2 build of Gary's project I will sell them for
>>> $110 each which is still less than what you would pay for a brand new DE1.
>> Where in the world are these boards located?
>>
>>
>



More information about the Coco mailing list