[Coco] CoCo3 FPGA project analog boards
Dave Philipsen
dave at davebiz.com
Tue May 10 19:12:14 EDT 2016
Dave Philipsen
> On May 10, 2016, at 3:28 PM, Zippster <zippster278 at gmail.com> wrote:
>
> Hi Dave,
>
> I think that is correct. Maybe Gary can verify.
>
> Digikey has about 70 of DE1s in stock for $156.25 + shipping. Which
> I believe beats Terasic’s price when you factor in their somewhat expensive shipping.
> <http://www.digikey.com/product-detail/en/terasic-inc/P0528/P0528-ND/1833602 <http://www.digikey.com/product-detail/en/terasic-inc/P0528/P0528-ND/1833602>>
>
> Of course, Dave Philipsen may be able to supply one as well.
>
I don't currently have any DE1s but I do have a couple of DE2s right now. There is already a port of CoCo3GA to the DE2 (with 512k/1 meg) and I expect that we'll get support for the analog board for it in the near future.
Dave
> Tim Linder is helping out with getting top plates made. These should turn out as
> really nice looking finished packages! :)
>
> - Ed
>
>
>> On May 10, 2016, at 2:31 PM, David Ladd <davidwladd at gmail.com> wrote:
>>
>> Ed,
>>
>> Those boards look nice :D
>>
>> Got a question though. If we were to buy one of the brand new Altera DE-1
>> boards can we just disable the onboard RAM to get around the timing issue
>> with the RAM on the new boards and just entirely use the RAM off of this
>> add-on board?
>>
>>
>>
>> +----------+
>> |David Ladd|
>> +----------+
>>
>>
>>
>>
>>> On Tue, May 10, 2016 at 12:32 PM, Zippster <zippster278 at gmail.com> wrote:
>>>
>>> Hello everyone,
>>>
>>> I finally received test PCBs back for the CoCo3 FPGA Analog board. I'll
>>> definitely be using the faster shipping option on the main run.
>>>
>>> Anyway, these are coming together very nicely. I some of the remaining
>>> parts on the way to assemble one of these. If the testing goes well,
>>> there will be just a few small tweaks on positioning a couple of items,
>>> and the main run can be ordered.
>>>
>>> I'm missing a couple of standoffs that are on the way, but you can get the
>>> idea of how this will look from the pics.
>>>
>>> After the run is completed, I think it would be nice to have some acrylic
>>> top sheets cut for our DE-1s. :)
>>>
>>> Pics…
>>> <https://drive.google.com/open?id=0B1sgl615FlGndV9TUElDaXN3WTA>
>>>
>>>
>>> - Ed
>>>
>>>
>>>
>>>
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
More information about the Coco
mailing list