[Coco] CoCo3 FPGA project analog boards

spereira1952 at comcast.net spereira1952 at comcast.net
Fri Apr 15 08:24:12 EDT 2016


FWIW, all I am interested in is a good set of directions for what to buy (and where) in order to end up with the DE-1, Analog Board, and the original plexiglass top all stacked together with proper standoffs, and all screwed together solidly. Will this be possible? 

Thanks, 
smp 
- - - 
Stephen Pereira 
Bedford, NH 03110 
KB1SXE 


----- Original Message -----

From: "Ron Klein" <ron at kdomain.org> 
To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com> 
Sent: Friday, April 15, 2016 8:00:38 AM 
Subject: Re: [Coco] CoCo3 FPGA project analog boards 

Hi John, 

I would be interested in a case, though not sure what you had in mind for 
this project. Would it be a single case designed to enclose both items 
with access ports for the various connectors, dip switches, etc.? Is there 
any chance of you incorporating any retro type design elements to it? 
While you can't just make a Coco case itself, perhaps something that has 
vents like the Coco 2/3? Maybe a recessed area for the Color Computer 
badges like Cloud-9 makes? 

I realize complexity may add to cost, but figured I would ask. Your case 
designs have always been nice. 

Thanks! 


On Thu, Apr 14, 2016 at 11:18 PM, John Strong <johnstrong at hotmail.com> 
wrote: 

> Michael,Depends on a lot of factors, since I don't have a DE1 and would 
> have to purchase one plus the analog board.How many people would be 
> interested? Any new projects need to have a chance of breaking even, 
> hopefully make a little.Anyone have the dimensions of the DE1?John 
> StrongStrongWare 
> > Date: Tue, 12 Apr 2016 21:57:39 -0400 
> > From: Michael Brant <brant.michael.l at gmail.com> 
> > To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com> 
> > Subject: Re: [Coco] CoCo3 FPGA project analog boards 
> > Message-ID: 
> > <CAGJGKwi6yD93-oXZtKi8AeCgY2MWv+eSHxoLoOLyL= 
> cpDNG3CA at mail.gmail.com> 
> > Content-Type: text/plain; charset=UTF-8 
> > 
> > Any possibility of a 3D printed case from anyone on the list? hint hint 
> John 
> 




More information about the Coco mailing list