[Coco] Question about 26-3024 MPI selector switch.

[K. Pruitt]

> On Fri Feb 27, K. Pruitt wrote:
>
> Is this normal behavior for the slot selector switch on the 26-3024, or am 
> I
>> looking at a broken switch here?  It works fine in all 4 switch 
>> positions.
>
>
>On Fri Feb 27, Rogelio Perea wrote:
>
> As far as I can tell - after owning about 4 of the 3024 MPIs, the switch
> operation on those can be better described as "being mushy", there is no
> definitive click on each position. In fact on a previous 3024 I had to
> remove from service, the switch got so gummed down that the plastic
> extension (which protrudes from the switch to the outside of the case on
> the front) broke-off and I had to rely on a small flat head screwdriver to
> switch slots.
>
> I have a 3124 MPI on my CoCo 3 and the switch action on that model is
> clean, there is a reassuring click on each switch position.
>
> -- RP
>
> -- 

Thanks for the info.  It is very much appreciated.  Having always used a 
3124 I was used to the click when moving the switch.  I can see why they 
changed the switch design.  Push buttons to select the slot would have been 
nice.

Again, thanks.