[Coco] SDC oddness

[Bob Devries]

OK...

I just had this happen again.

PRINT PEEK(&HFF43) returns 2

All dip switches are off.

Regards, Bob Devries
Dalby, QLD, Australia


On 9/02/2015 7:57 AM, Darren A wrote:
> On Sun, Feb 8, 2015 at 2:45 PM, Bob Devries wrote:
>
>> I also have seen this behaviour. It happens rarely, so I just ignore it;
>> cycle the power and continue.
>>
>>
>> On 9/02/2015 7:39 AM, Allen Huffman wrote:
>>
>>> On Feb 8, 2015, at 8:50 AM, Steven Hirsch wrote:
>>>>
>>>> I'm having mostly good experiences with my SDC, but there is one bit of
>>>> odd behavior:  Every so often it will power up with "vanilla" BASIC active
>>>> (no SDC extensions).  When this occurs, I have to power down the computer
>>>> and expansion pack, wait a few seconds and restart.  That will generally
>>>> get me back to the modified firmware.
>>>>
>>>> Any idea why this might be happening?
>>>>
>>>
>>> No, but I see that myself from time to time. I power off and back on.
>>>
>>
>
>
> The next time someone observes this behaviour could you please enter PRINT
> PEEK(&HFF43) and post the results along with the DIP switch settings of the
> board.  I would like to find out if the problem could be related to the
> latching of the switch settings at power-up.
>
> Thanks,
> Darren
>