[Coco] Printing from DW

[jmlaw at iprimus.com.au]

Nick wrote:
>I'll just use VCC to do the print.

I've written a simple virtual printer that will read the Vcc bitbanger 
output file containing Tandy graphics codes and output the image that you 
can then save or paste to a paint program. Is it graphics you're wanting to 
print?

I had planned to add support for all Tandy printers but stopped once I 
realized DriveWire 4 had a virtual printer and had indicated to support 
Tandy codes in the future. I think Aaron was ok with it as I didn’t want to 
step on any toes, but I had other things to move onto as well. So as is, it 
supports the DMP 105/106 as the 106 is what I had back in the day.

Here's a pic of where I left it:
http://i737.photobucket.com/albums/xx18/JasonsCoCo3/VP_zps79ba0a21.png

A sample 'printed' page from MusicaII:
http://i737.photobucket.com/albums/xx18/JasonsCoCo3/MusicaII_zpscf7d37ec.png

So far it's limited to about 6 consecutive pages. If you just want to print 
a pic and you can do so in DMP 105/106 format, you could send me the file 
and I could send you back the image. If it could be of any use let me know.

Jason