[Coco] CocoSDC

[tonym]

Is there an interface/program to use under OS-9 to switch the disk image(s)?

Tony


---- Original Message ----
From: "Darren A" <mechacoco at gmail.com>
Sent: 11/11/2014 6:29:04 PM
To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
Subject: Re: [Coco] CocoSDC

On Tue, Nov 11, 2014 at 4:14 PM, Richard E Crislip  wrote:

> <snip>
>
> Hi,
>
> I don't know if I should ask these questions online or offline, but
> there is a jumper and dip switch on the board you may have explained
> already, and I may have gotten stoned and missed it 8-). Anyway, what is
> the jumper labeled DRQ AUTO? Right now none of the pins are shorted,
> the short is hanging off one of the pins. Next to it is a four
> switch micro switch block. All of them are in the off position. The
> board is labeled "bank 4,2,1" whereas the switch is labeled "1,2,3,4".
> Finally there is a push button next to the LED, what does it do.
>


The jumper and switches are descibed here:
<http://cocosdc.blogspot.com/p/hardware-guide.html>

The push button is used to "switch disks" when using a multi-disk program
as described here:
<http://cocosdc.blogspot.com/p/multi-disk-programs.html>


Darren

-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco