[Coco] supercomm error 221

[keithclark1966 at gmail.com]

Kip,

I had the Nx module installed, I just had no idea how to startup or use
supercomm.  I'm trying out the various programs in the drivewire 4 extras
disk, but have no documentation to help me out!

Keith



On Fri, May 30, 2014 at 10:31 PM, Kip Koon <computerdoc at sc.rr.com> wrote:

> Hi Keith!
> Error 221 means a needed module is missing.  You most likely need the /Nx
> modules if you are starting it with "supercomm /n" if I remember correctly.
> It's been a little while since I have ran supercomm but I'm pretty sure
> that
> is correct.  Do an "mdir" command and see what modules are loaded by your
> NitrOS-9 disk when it boots up.  Let me know if you need me to run my setup
> to verify this or need further information.  I'll be up for a while.  Take
> care my friend.
> Kip
>
> Kip Koon
> computerdoc at sc.rr.com
> http://www.cocopedia.com/wiki/index.php/Kip_Koon
> http://computerpcdoc.com/
>
>
> -----Original Message-----
> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of
> keithclark1966 at gmail.com
> Sent: Friday, May 30, 2014 10:20 PM
> To: CoCoList for Color Computer Enthusiasts
> Subject: [Coco] supercomm error 221
>
> I'm getting error 221 when trying to start supercomm, any ideas?
>
> Keith
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>