[Coco] VCC Experience

[Bill Nobel]

Are you serious?  I never would of thought that, but thinking about it. DW4 is a serial protocol on a virtual serial port.

Bill Nobel
 
On May 25, 2014, at 5:29 PM, Aaron Wolfe <aawolfe at gmail.com> wrote:

> On May 23, 2014 10:47 PM, "Bill Nobel" <b_nobel at hotmail.com> wrote:
>> 
>> Well, after a little makefile searching, I found what I needed.  I played
> with telnet to my raspberry pi,  for a bit, works good except vt100 codes
> are coming through so ‘ls' breaks telnet with error 208.
> 
> Using a terminal emulator works better.
> 
> Supercomm is in the nitros9 project and works well.   Start it with /n as
> an argument, I.e.:  supercomm /n
> 
> Then use the DW Hayes AT commands to connect:  ATD1.2.3.4:5678
> 
> That way you'll get reasonable ansi/vt100 terminal emulation and a channel
> where control codes won't cause issues.  Any terminal program should work.
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco