[Coco] VCC Experience

[Aaron Wolfe]

On May 23, 2014 10:47 PM, "Bill Nobel" <b_nobel at hotmail.com> wrote:
>
> Well, after a little makefile searching, I found what I needed.  I played
with telnet to my raspberry pi,  for a bit, works good except vt100 codes
are coming through so ‘ls' breaks telnet with error 208.

Using a terminal emulator works better.

Supercomm is in the nitros9 project and works well.   Start it with /n as
an argument, I.e.:  supercomm /n

Then use the DW Hayes AT commands to connect:  ATD1.2.3.4:5678

That way you'll get reasonable ansi/vt100 terminal emulation and a channel
where control codes won't cause issues.  Any terminal program should work.