[Coco] Coco monitors 1084s-xx ?

[Kip Koon]

Hi Sylvain!
Thank you for the link.  It has some very helpful information.  I appreciate it.
Kip

-----Original Message-----
From: coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com] On Behalf Of Sylvain Rousseau
Sent: Sunday, March 30, 2014 9:40 AM
To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] Coco monitors 1084s-xx ?

Hi Kip,

You may find it here:

http://gona.mactar.hu/Commodore/monitor/Commodore_monitors_by_model_number.html

Sylvain



Envoyé de mon ASUS Pad

Kip Koon <computerdoc at sc.rr.com> a écrit :

>Hi Bill!
>My 1084S-P unfortunately does not have the DB9 RGB connector.  Instead 
>it has 2 round DIN connectors for RGB input.  One is labeled "TTL RGB" 
>with 8-pins and the other is labeled "lin. RGB" with 6-pins and I have 
>no clue what the pin out is for either input.  I would like to use the RGB inputs.
>Would anyone have any information on how to utilize these inputs?  Any 
>help is appreciated.  Thank you in advance.
>Kip
>
>-----Original Message-----
>From: coco-bounces at maltedmedia.com 
>[mailto:coco-bounces at maltedmedia.com] On Behalf Of Bill Loguidice
>Sent: Saturday, March 29, 2014 9:22 PM
>To: CoCoList for Color Computer Enthusiasts
>Subject: Re: [Coco] Coco monitors 1084s-xx ?
>
>It's the "Commodore 1084S Monitor Cable DB-9 Mating Cable" on the 
>Cloud-9 site. Just make sure your 1084S has the square connector (some 
>don't, as there were several models of the 1084). For mine, the Cloud-9 
>cable terminated in a female connection, which is the same as on the 
>back of my 1084S, so I needed to change the gender to male so it could 
>plug into my 1084S. Here are the photos of the connections and the gender changer:
>
>https://flic.kr/p/myW2bT
>
>https://flic.kr/p/myWvFM
>
>===================================================
>Bill Loguidice, Managing Director; Armchair Arcade, 
>Inc.<http://www.armchairarcade.com>
>===================================================
>Authored
>Books<http://www.amazon.com/Bill-Loguidice/e/B001U7W3YS/ref=ntt_dp_epwb
>k_1>a
>nd
>Film <http://www.armchairarcade.com/film>; About me and other ways to 
>get in touch <http://about.me/billloguidice> 
>===================================================
>
>
>On Sat, Mar 29, 2014 at 4:10 PM, Kip Koon <computerdoc at sc.rr.com> wrote:
>
>> Hi Bill!
>> I'll have to look at my 1084S-P again because I also remember a 
>> button that switches between Composite video and RGB myself.  I just 
>> have never taken advantage of the RGB input.  I had actually 
>> forgotten about that fact  until I read your email just now.  How do 
>> I figure out which one of the monitor cables I will need from 
>> Cloud9tech?  He lists several, but if I remember correctly, I could 
>> not tell which ones to order to connect my Coco 3 up to my various 
>> monitors.  Take care my friends.
>> Kip
>>
>> -----Original Message-----
>> From: coco-bounces at maltedmedia.com
>> [mailto:coco-bounces at maltedmedia.com]
>> On
>> Behalf Of Bill Loguidice
>> Sent: Saturday, March 29, 2014 10:00 AM
>> To: CoCoList for Color Computer Enthusiasts
>> Subject: Re: [Coco] Coco monitors 1084s-xx ?
>>
>> I'm using a 1084S-D1 with a cable from Cloud-9 (I did have to buy a 
>> simple gender changer separately for the end of the cable, though). 
>> It works perfectly with my CoCo 3, plus I can simultaneously plug 
>> into the 1084S-D1's composite connection for legacy software and just 
>> switch back and forth between that and the RGB with the button on the 
>> monitor.
>>
>> -Bill
>>
>> ===================================================
>> Bill Loguidice, Managing Director; Armchair Arcade, 
>> Inc.<http://www.armchairarcade.com>
>> ===================================================
>> Authored
>> Books<http://www.amazon.com/Bill-Loguidice/e/B001U7W3YS/ref=ntt_dp_ep
>> w
>> bk_1
>> >a
>> nd
>> Film <http://www.armchairarcade.com/film>; About me and other ways to 
>> get in touch <http://about.me/billloguidice> 
>> ===================================================
>>
>>
>> On Fri, Mar 28, 2014 at 10:14 PM, William Haywood < 
>> firstsecondary at verizon.net> wrote:
>>
>> >  Does any one know which 1084S-xx monitors will work with the coco3?
>> > Without combining the Horz -Vert Sync?
>> >
>> >
>> > --
>> > Coco mailing list
>> > Coco at maltedmedia.com
>> > http://five.pairlist.net/mailman/listinfo/coco
>> >
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>>
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>>
>
>--
>Coco mailing list
>Coco at maltedmedia.com
>http://five.pairlist.net/mailman/listinfo/coco
>
>
>--
>Coco mailing list
>Coco at maltedmedia.com
>http://five.pairlist.net/mailman/listinfo/coco

--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco