[Coco] Glenside IDE Drivers NitrOS-9 Disk Image Needed

[Daniel Campos]

Have set the jumper on the Glenside to position "50" ? The default is "70".

Daniel


2014-03-12 8:55 GMT-03:00 Shane Broadbent <shanetb at telstra.com>:

> Luis Antoniosi (CoCoDemus <retrocanada76 at ...> writes:
>
> >
> > dummy question: is your cf adapter on glenside powered on ? how did
> > you do it ? using external power supply or modding the glenside
> > through pin 20 ?
> >
> > On Wed, Mar 12, 2014 at 6:56 AM, Shane Broadbent <shanetb at ...> wrote:
> > >
> > > Luis Antoniosi (CoCoDemus <retrocanada76 <at> ...> writes:
> > >
> > >>
> > >> just try the command you posted with my image:
> > >>
> > >> http://www.mediafire.com/download/v8ta538euux013d/glenside.img.zip
> > >>
> > >> although it's a 352 mb image you will only transfer the 245MB. It's ok
> > >> for OS-9 and the first 256 virtual disks.
> > >>
> >
>
> Thanks for the replies Luis, The CF adapter is currently powered with
> external 5v power supply. The Power & Card Detect LEDs light up.
>
> I formated the SD card with gparted as you suggested.
>
> I then performed the DD as you suggested and that went through OK.
>
> But I still get the error message on booting HDB-DOS
>
> 'LBA Hard Drive Not Found'
>
> This is getting a bit frustrating...
>
> Cheers,
> Shane
>
>
>
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>