[Coco] MPI help needed

tonym tonym at compusource.net
Tue Jun 10 23:46:29 EDT 2014


switch=2,rom=2, exec&HE010 gives garbage.
switch=1,rom=2, exec&he010 gives like a clear-the-screen, and OK prompt at top line.

but... powered off, switch=1,rom=1, power on = cartridge autostarts.

Tony
tonym at compusource.net


---- Original Message ----
From: "Arthur Flexser" <flexser at fiu.edu>
Sent: 6/10/2014 11:40:22 PM
To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
Subject: Re: [Coco] MPI help needed

You should try EXEC&HE010 with the rompak in (a) the switch set for the
slot the rompak is in, and (b) the switch set for a different slot.  If the
rompak executes only when the slot number matches the switch, then the
switch is working and it is only the autostart pin that isn't functioning.

Art


On Tue, Jun 10, 2014 at 11:30 PM, tonym <tonym at compusource.net> wrote:

> Don't get any crashing, just the regular Extended Basic 2.0 message.
>
> However, if I put the megabugs rompak in slot 1, and no matter WHAT slot #
> the switch is set to, when I power everything on, mega bug fires up.
>
> If I have the switch set to, say, slot 3, and I put the mega bugs in slot
> 3, power everything up, all I get is the standard coco3 extended basic
> message.
> If I leave the switch on slot 3, power everything off, and move the rompak
> to slot 1, and power back on, it will work, even wth swtich on 3, and
> rompak in slot 1.
>
> Tony
> tonym at compusource.net
>
>
> ---- Original Message ----
> From: "Gene Heskett" <gheskett at wdtv.com>
> Sent: 6/10/2014 11:25:29 PM
> To: coco at maltedmedia.com
> Subject: Re: [Coco] MPI help needed
>
> On Tuesday 10 June 2014 22:59:12 Bill Nobel did opine
> And Gene did reply:
> > That would suggest the switch itself to me, as the slot doesn’t seem to
> > switch.
> >
> > Bill Nobel
>
> Bill, Tony;
>
> I have been under the impression, could well be wrong, that the switch is
> read only at power up. What happens if the switch is moved and the power
> is cycled?  Otherwise you have to poke $FF7F, with $00 for slot 1, $11 for
> slot 2, $22 for slot 3, and $33 for slot 4.  IIRC you should be able to
> read back what you wrote to $FF7F.
>
> In that unmodified one, it will also ghost to $FF9F, which is in the GIME
> image of a coco3.  Near instant crash. :(
> >
> > On Jun 10, 2014, at 8:47 PM, tonym <tonym at compusource.net> wrote:
> > > OK gents...
> > >
> > > Need an assist... Pulled out an old grey -3024 (not yet modified) out
> > > of the mothballs. Plugged it in, into a coco3. Can't get anything
> > > but slot 1 to work, no matter WHAT slot the switch is on.
> > >
> > > Using a rompak, tried all 4 slot, using their respective switch
> > > position, only slot 1 worked.
> > >
> > > Putting switch on slot 2, pak works in slot 1, same thing for switch
> > > to slot 3, slot 1 works, same with switch set to slot 4, slot 1
> > > works.
> > >
> > > Any ideas?
> > >
> > > Tony
> > > tonym at compusource.net
>
>
> Cheers, Gene Heskett
> --
> "There are four boxes to be used in defense of liberty:
>  soap, ballot, jury, and ammo. Please use in that order."
> -Ed Howdershelt (Author)
> Genes Web page <http://geneslinuxbox.net:6309/gene>
> US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>

-- 
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco


More information about the Coco mailing list