[Coco] Correct pin out for CoCo3 RGB connector?

[Michael Graham]

Looks to me like they all agree, it's just that the first link shows it 
from the other side of the connector.  Best way to tell which direction 
you should wire from would probably be to take a multimeter and check 
for continuity between the two outer pins.  The side with VSYNC should 
have no continuity, and the side with GND should have continuity.  I 
built my own RGB cable a while back using this method, but I've lost it 
and don't remember off the top of my head which way is correct.

--Michael

On 8/14/2014 8:45 AM, Christopher Barnett Fox wrote:
> Kip,
>
> Of the three links I included in my original message, two agree one
> disagrees. Or, my vision's worse than I thought or I'm becoming senile.
>