[Coco] HDB-DOS 1.4 LBA Does Not Produce OK Prompt on Glenside IDE Controller

[Kip Koon]

Hi HDB-DOS Experts!

I burnt HDB-DOS 1.4 LBA and ran it on the Glenside IDE Controller last night
on my Coco 3 and was greeted by the HDB-DOS 1.4 LBA message as well as the
DECB message, but the OK prompt never appeared?  I figured HDBLBA.ROM was
the correct rom image to use since HDB-DOS 1.1D LBA is running on my
SuperIDE controller.  I'm running an IDE to CF Card adapter plugged into the
IDE connector and it is strapped as the Master Drive and for +5V which is
externally supplied.  This configuration works fine under NitrOS-9 6809 L2
v3.3.0 DW Coco 3.  Is HDBLBA.ROM the correct rom image file to use and if
so, what do you think is the problem.  If not, which rom image should I use?
Any other ideas?  Thank you all in advance for any help you can give.

 

Kip Koon

 <mailto:computerdoc at sc.rr.com> computerdoc at sc.rr.com

 <http://www.cocopedia.com/wiki/index.php/Kip_Koon>
http://www.cocopedia.com/wiki/index.php/Kip_Koon

 <http://computerpcdoc.com/> http://computerpcdoc.com/