[Coco] Another Coco Virtual Disk Util

Walt Zydhek walt at wzydhek.com
Fri Oct 18 19:20:23 EDT 2013


Bulk file attribute changes for OS9 formatted disks  is now supported.

-Walt Zydhek

-----Original Message-----
From: coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com] On
Behalf Of Walt Zydhek
Sent: Friday, October 18, 2013 3:14 PM
To: 'CoCoList for Color Computer Enthusiasts'
Subject: Re: [Coco] Another Coco Virtual Disk Util

This request will take me some time, as I will have to either change the
file info dialog into a tri-state dialog for handling  bulk changes, or
create a different dialog for purposes of mass file changes. With the fix of
the file attribute retention, this shouldn't be a major inconvenience for
now.

-Walt Zydhek

-----Original Message-----
From: coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com] On
Behalf Of Wayne Campbell
Sent: Friday, October 18, 2013 2:30 PM
To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] Another Coco Virtual Disk Util

I almost forgot one little thing. It would have been nice to be able to
select a group of files and change all their attributes at once, rather than
having to go sequentially through the directory one file at a time to change
the attributes. On a directory with a few files, it doesn't matter, but when
you have over 15 files it becomes burdensome to do it one-at-a-time. The
directory I had to do this with contains 147 files. It took awhile to change
all those attributes.


Wayne


On Fri, Oct 18, 2013 at 2:22 PM, Wayne Campbell <asa.rand at gmail.com> wrote:

> Thanks for fixing the '..' and '.' problem. While you're at it, I 
> found a couple more things.
>
> First, if you right-click a entry in the file pane (and I think also 
> in the directory pane) it will select the item in the pane, but all 
> items in the popup menu are grayed (disabled). I have to left-click, 
> then right-click to get the items in the menu to be active. Can you 
> make it so a right-click alone is sufficient?
>
> When files are copied (and I assume directories), the attributes of 
> the files are always set to EWRewr. The default for non-executable 
> files is --R-wr, and for executable files is E-Rewr. When copying, I 
> believe that the files current attributes should be kept intact. I 
> noticed that all the files I copied were -WR-wr, and the copy made 
> them all EWRewr. Can you make it so a file or directory's attributes 
> are
preserved in the copy?
>
>
> Thanks,
> Wayne
>
>
> On Fri, Oct 18, 2013 at 1:23 PM, Walt Zydhek <walt at wzydhek.com> wrote:
>
>> Hmmm. You found a loophole I missed. I had the sector editor set to 
>> read only until I could make some changes in the hex editor to 
>> prevent pasting more bytes than the sector's length (using a 3rd 
>> party's open source hex
>> viewer/editor) or truncating the sector to smaller than sector size. 
>> I totally missed that bytes could still be changed with the bit 
>> editor. I will re-enable read/write of the sector editor. And put 
>> that part on the back burner for now.
>>
>> -----Original Message-----
>> From: coco-bounces at maltedmedia.com
>> [mailto:coco-bounces at maltedmedia.com]
>> On
>> Behalf Of Wayne Campbell
>> Sent: Friday, October 18, 2013 10:01 AM
>> To: CoCoList for Color Computer Enthusiasts
>> Subject: Re: [Coco] Another Coco Virtual Disk Util
>>
>> More info. Apparently, EmuDisk does copy the files. I found two things.
>> First, I used EmuDisk's sector editor to change the value of that 
>> byte from
>> 3 to 1 in all of my vhd images. I had to use the bit editor to do it, 
>> as that is the only way I found. Then select Save changes under the 
>> file menu in the editor window. If you select Info from the disk 
>> menu, it will still say there are 2 heads. Ignore that, as it has no 
>> bearing. Checking the value again it was still changed to 1 from 3.
>>
>> Then, close it all out and restart EmuDisk, and open the 2 vhd images 
>> you want to deal with. I started by copying a single file. It did not 
>> show up in the destination window as I expected, so I closed that vhd 
>> image and reopened it. There was the file. EmuDisk needs to let you 
>> know when it's done by refreshing the pane.
>>
>> Next I tried copying directories. It works, so long as you drag the 
>> folder to the folder pane in the destination image window. It will 
>> also display all the files in that folder in the destination vhd's 
>> file pane. Copying directories is the only one that displays the 
>> results immediately. If you are copying sub-directories, make sure 
>> the directory you want it copied to is selected in the destination 
>> folder/directory pane. I hope this helps those who are still having 
>> problems.
>>
>> Wayne
>>
>>
>> On Fri, Oct 18, 2013 at 9:06 AM, Luis Fernández
>> <luis46coco at hotmail.com>wrote:
>>
>> > Interesting I do I'll check in cocodskutil
>> >
>> >
>> >
>> > --
>> > Coco mailing list
>> > Coco at maltedmedia.com
>> > http://five.pairlist.net/mailman/listinfo/coco
>> >
>>
>>
>>
>> --
>> The Structure of I-Code
>> http://www.cocopedia.com/wiki/index.php/The_Structure_of_I-Code
>>
>> decode
>> http://cococoding.com/wayne/
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>>
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>>
>
>
>
> --
> The Structure of I-Code
> http://www.cocopedia.com/wiki/index.php/The_Structure_of_I-Code
>
> decode
> http://cococoding.com/wayne/
>



--
The Structure of I-Code
http://www.cocopedia.com/wiki/index.php/The_Structure_of_I-Code

decode
http://cococoding.com/wayne/

--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco


--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco




More information about the Coco mailing list