[Coco] Setting up the /IH descriptor

[Philip Zeigler]

nam=IH mgr=RBF ddr=rbsuper
hpn=07 hpa=FF50 drv=00 stp=FF typ=81 dns=08 cyl=0023 sid=01
vfy=01 sct=0012 t0s=0012 ilv=03 sas=08 wpc=05 ofs=2DDC rwc=

Philip


On Jul 9, 2013, at 4:17 AM, "Bob Devries" <devries.bob at gmail.com> wrote:

> Hi Luis,
> 
> I'm also struggling with a SuperIDE with CF card. I'm trying to set it all up for a friend.
> 
> Could you show a complete output of the command:
> 
> dmode /ih
> 
> I'm getting errors with the CDROM drive attached to the SuperIDE, and thought at first that it was the drivers, but it appears that accessing the IDE *also* gives errors except for /DD and /I0.
> 
> Either a dmode output or the output of dump would suffice.
> 
> Regards, Bob Devries
> Dalby, QLD, Australia
> 
> ----- Original Message ----- From: "Luis Antoniosi (CoCoDemus)" <retrocanada76 at gmail.com>
> To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
> Sent: Tuesday, July 09, 2013 3:45 AM
> Subject: Re: [Coco] Setting up the /IH descriptor
> 
> 
>> ops sorry
>> 
>> dmode /IH wpc=05 ofs=2ddc stp=ff
>> 
>> 
>> 
>> On Mon, Jul 8, 2013 at 1:43 PM, Luis Antoniosi (CoCoDemus) <
>> retrocanada76 at gmail.com> wrote:
>> 
>>> try:
>>> 
>>> dmode /IH dns=05 ofs=2ddc stp=ff
>>> 
>>> 
>>> On Mon, Jul 8, 2013 at 1:40 PM, Philip Zeigler <philip at zeiglers.net>wrote:
>>> 
>>>> I've created a new boot disk using the latest version (built from source)
>>>> with the /IH descriptor.  I'm getting Error 214 - No permission when I try
>>>> to access a drive.
>>>> 
>>>> I've tried dmode /IH STP=ff which is an os9 disk but any disk I try to
>>>> access gives me the same error.  The permissions are correct on the IH
>>>> descriptor when I made the boot floppy.  There must be more to the config.
>>>> 
>>>> Philip
>>>> 
>>>> 
>>>> On Jul 8, 2013, at 1:26 PM, "Luis Antoniosi (CoCoDemus)" <
>>>> retrocanada76 at gmail.com> wrote:
>>>> 
>>>> > If you're running from Cloud9 stock CF I'm afraid it won't be > possible.
>>>> > NitrOS-9 had the /IH descriptor broken for some time. You need a fresh
>>>> > install or use my CF image (requires 512mb or higher cards):
>>>> >
>>>> > http://www.mediafire.com/download/9rsxl181sgqjc9m/cf_352mb.zip
>>>> >
>>>> > (you can write it on a 256MB card, but the second virtual disk set > (MOD
>>>> > PLAYER) won't be accessible.  By default on a coco3 it will boot on > 6309
>>>> > mode, choose option 4 for a 6809 level 2.
>>>> >
>>>> > In my image, it's enough to do:
>>>> >
>>>> > dmode /IH STP=0C
>>>> >
>>>> > to access disk 12, but if it's not a os-9 disk this will give you read
>>>> > error.
>>>> >
>>>> >
>>>> >
>>>> > On Mon, Jul 8, 2013 at 1:19 PM, Philip Zeigler <philip at zeiglers.net>
>>>> wrote:
>>>> >
>>>> >> Can someone help me figure out how to configure the /IH descriptor to
>>>> >> access my HDB-DOS drives from Nitros9?
>>>> >>
>>>> >> My HDB-DOS offset is $052ddc.
>>>> >>
>>>> >> What does the dmode command look like if I wanted to set it to access
>>>> disk
>>>> >> 12 for example?
>>>> >>
>>>> >> Thanks,
>>>> >>
>>>> >> Philip
>>>> >>
>>>> >> --
>>>> >> Coco mailing list
>>>> >> Coco at maltedmedia.com
>>>> >> http://five.pairlist.net/mailman/listinfo/coco
>>>> >>
>>>> >
>>>> >
>>>> >
>>>> > --
>>>> > Long live the CoCo
>>>> >
>>>> > --
>>>> > Coco mailing list
>>>> > Coco at maltedmedia.com
>>>> > http://five.pairlist.net/mailman/listinfo/coco
>>>> 
>>>> 
>>>> --
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> http://five.pairlist.net/mailman/listinfo/coco
>>>> 
>>> 
>>> 
>>> 
>>> --
>>> Long live the CoCo
>>> 
>> 
>> 
>> 
>> -- 
>> Long live the CoCo
>> 
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco 
> 
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco