[Coco] Setting up the /IH descriptor

[Philip Zeigler]

I've created a new boot disk using the latest version (built from source) with the /IH descriptor.  I'm getting Error 214 - No permission when I try to access a drive.

I've tried dmode /IH STP=ff which is an os9 disk but any disk I try to access gives me the same error.  The permissions are correct on the IH descriptor when I made the boot floppy.  There must be more to the config.

Philip


On Jul 8, 2013, at 1:26 PM, "Luis Antoniosi (CoCoDemus)" <retrocanada76 at gmail.com> wrote:

> If you're running from Cloud9 stock CF I'm afraid it won't be possible.
> NitrOS-9 had the /IH descriptor broken for some time. You need a fresh
> install or use my CF image (requires 512mb or higher cards):
> 
> http://www.mediafire.com/download/9rsxl181sgqjc9m/cf_352mb.zip
> 
> (you can write it on a 256MB card, but the second virtual disk set (MOD
> PLAYER) won't be accessible.  By default on a coco3 it will boot on 6309
> mode, choose option 4 for a 6809 level 2.
> 
> In my image, it's enough to do:
> 
> dmode /IH STP=0C
> 
> to access disk 12, but if it's not a os-9 disk this will give you read
> error.
> 
> 
> 
> On Mon, Jul 8, 2013 at 1:19 PM, Philip Zeigler <philip at zeiglers.net> wrote:
> 
>> Can someone help me figure out how to configure the /IH descriptor to
>> access my HDB-DOS drives from Nitros9?
>> 
>> My HDB-DOS offset is $052ddc.
>> 
>> What does the dmode command look like if I wanted to set it to access disk
>> 12 for example?
>> 
>> Thanks,
>> 
>> Philip
>> 
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>> 
> 
> 
> 
> -- 
> Long live the CoCo
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco