[Coco] Glen's Online store Again

[Glen VanDenBiggelaar]

The kit is a 06201KP from www.jyetech.com it is been discontinued

Maximum equivalent-time sampling rate (repetitive signal) - 20MSa/s


Maximum real-time sampling rate - 2MSa/s


Resolution - 8 bits


Record length - 256 bytes


Analog bandwidth - 1MHz 


Vertical sensitivity - 100mV/Div - 5V/Div  


Vertical position adjustable with indicator


Input impedance - 1M ohm 


Max input voltage - 50Vpk (1x probe) [500Vpk for 10x probe]


DC/AC/GND coupling


Horizontal - 0.5us/Div - 10m(minute)/Div 


Auto/Normal/Single trig modes


Rising/Falling edge trigger


External trig available


Trigger output is available, which makes it possible to cascade scopes to do multi-channel capture. 


Trigger level adjustable with indicator


Hold/run feature


Save/recall up to 6 captures 


FFT function available - size of 256 points and 512 points selectable, sampling rate of 1Ksps to 2Msps selectable 


Transfer screen to PC as bitmap file via serial connection 


Built-in 500Hz/5Vpp test signal


Frequency Meter (For TTL level input signal)


Auto switching between Oscilloscope Mode and Frequency Meter Mode 




Dimension: 110mm X 65mm X 25mm (without case)


Weight: 125 gram (not including probe and power adapter)

got this off the site, hope it helps. The kit is just a small ziplock bag with the instruction sheets and the parts LCD looks to be 2 inch diag.
-------------------------------------------------------------------------------------------------------------


Gene Heskett 
    gheskett at wdtv.com
       

    Wed Dec 11 08:38:00 EST 2013

>The kit needs more specs, channels, bandwidth, size of lcd, psu 

>requirements.  And current exchange rates. :)