[Coco] Os9 Intercept

Bob Devries devries.bob at gmail.com
Tue Oct 30 02:37:50 EDT 2012


Hi Bill,

I haven't tried this, but...

If you're programming in C, could you not put a NULL in the intercept call ?

The manuals (neither OS9/6809, not OS9/68000) mention anytthing about 
stopping the intercept.

Regards, Bob Devries
Dalby, QLD, Australia

----- Original Message ----- 
From: "Bill Pierce" <ooogalapasooo at aol.com>
To: <coco at maltedmedia.com>
Sent: Tuesday, October 30, 2012 2:42 PM
Subject: [Coco] Os9 Intercept


>
> Hi Guys,
> In OS9, how do you reset an Intercept back to default after a program has 
> set it?
> I have a program that runs a function that uses a signal intercept. When 
> the function is called, the F$Icpt is set. The program will be 
> continuously running, but the intercept will no longer be needed until the 
> same function is called again. The lines that set the intercept can be 
> jumped over each time, but the intercept itself does not need to in 
> operation unless within that function, as it interferes with the rest of 
> the program. So, how would I go about resetting the intercept address to 
> what it was before the change. I searched through both the "C" User's 
> guide and the OS9 Tech Reference manual and only found reference to 
> setting the intercept.
> So, is there some way to call before the intercept is set to get the 
> current intercept address saved before I set the intercept?
>
> Thnx
> Bill P
>
> Music from the Tandy/Radio Shack Color Computer 2 & 3
> https://sites.google.com/site/dabarnstudio/
> Bill Pierce
> ooogalapasooo at aol.com
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco 




More information about the Coco mailing list