[Coco] Tutorial on Telnet/inetd on Coco3 DW4 (is there one?)

Bob Devries devries.bob at gmail.com
Thu Oct 11 17:33:03 EDT 2012


Hi Gene,

I'm using the exact inetd.conf as was supplied:

6806 telnet protect banner,login,

I forgot to mention, that my USB<->RS232 dongle plugs into a powered 8-port 
usb extender, which is plugged into a usb-2 port on the pc. And yes (shame) 
I'm running winders :)

Regards, Bob Devries
Dalby, QLD, Australia

----- Original Message ----- 
From: "Gene Heskett" <gheskett at wdtv.com>
To: <coco at maltedmedia.com>
Sent: Friday, October 12, 2012 7:19 AM
Subject: Re: [Coco] Tutorial on Telnet/inetd on Coco3 DW4 (is there one?)


> On Thursday 11 October 2012 16:56:07 Bob Devries did opine:
>
>> Gene, here's my layout:
>>
>> My Coco3 is connected to my PC using the Drivewire cable from the Coco
>> to a DB9 , which is connected to an ATEN RS-232 to USB dongle, and
>> plugged into a USB port on the PC. That's the *only* connection between
>> the two.
>>
> And my drivewire cable is plugged into a ser<>usb adaptor, that is plugged
> into a 7 port hub which also has a brother laser printer plugged into it &
> sitting on the top shelf of the coco's desk, the src port of that hub is
> plugged into a 15 meter boosted usb2.1 extension cable, which at one point
> was plugged into a back panel usb breakout on the motherboard here, but
> which I believe may have been destroyed by a passing EMP from nearby
> lightening, so that cable is now plugged into another 7 port hub which is
> plugged into another breakout on the motherboard.  My usb 'tree' looks 
> like
> a weeping willow :)
>
> dw works well except for telnet, and the printer works well even from the
> coco, as the data asm or list sends to /p is sent to a scratch file by the
> .jar file, and I have a script that watches that scratch directory for new
> files, sending then on to the printer by way of the cups version of lp -d
> BROTHEHL2140 with options, then moves that file to a save the last 25
> directory with automatic recycling so I have to look at the date to see
> which is the newest.  The coco's assembly output and listings get spit out
> at 22 ppm, so it about has to be a configuration problem.  Since I have a
> 6309 in mine, I may move it from port 6809 to port 6309 just for fun, when
> it works using 6809.  Right now, a signal on port 6810 should run the proc
> command and send its output back, but that, like telnet, isn't working
> either.
>
> Since your IS working, can you post your /dd/sys/inetd.conf?
>
> Thanks Bob.
>
> Cheers, Gene
> -- 
> "There are four boxes to be used in defense of liberty:
> soap, ballot, jury, and ammo. Please use in that order."
> -Ed Howdershelt (Author)
> My web page: <http://coyoteden.dyndns-free.com:85/gene> is up!
> Familiarity breeds contempt -- and children.
> -- Mark Twain
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco 




More information about the Coco mailing list