[Coco] Arduino question

gene heskett gheskett at wdtv.com
Wed Oct 5 11:52:51 EDT 2011


On Wednesday, October 05, 2011 11:51:52 AM jdagget at gate.net did opine:

And your account at gate.net is refusing my messages, James.

> Gene
> 
> The ATmel AVRs are more like the HC11/HC12 in assembly programming.
> 
> There are some similarities and uniquicness of the AVR that has to be
> taken into account inporting Nitros09 over to say an XMega AVR. There
> are 32 8 bit general purpose registers. Register 31 and 32 act as a 16
> bit Z register, 29 and 30 would correspond to the Y register and 28 and
> 29 would correspond to the X register of the 6809.
> 
> 6809 code may be easier to port over. Not sure if 6309 is real easy or
> not.
> 
> The XMega series is as powerful an 8 bit processor as there is that is
> still in production. There are some neat things they do that are
> better. I like the RAMPx instruction where any of the 26 general
> purpose registers can be concacted with the Index registers to form 24
> or 32 bit registers. You can point to any where in a 24 bit memory map.
> There also is a DMA on some flavors.
> 
> It truly would be a neat project and a rather lengthy undertaking to do
> though.
> 
> 
> james
> 
> On 2 Oct 2011 at 18:07, gene heskett wrote:
> > Thanks Mark.
> > 
> > Silly Q?  Is this atmel chip equipt with the command set that would
> > let nitros9 be ported to it?


Cheers, Gene
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
It was all so different before everything changed.



More information about the Coco mailing list