[Coco] HBD-DOS 1.2 DW3 for CoCo3 serial port baud rate selectable?

[Boisy G. Pitre]

Tom,

There isn't a way to do this, short of patching a location in RAM to prevent the CoCo 3 from going into hi-speed mode (which effectively causes it to go from 57.6 to 115.2).  I don't have the exact location, but searching for FFD9 around the $CXXX area should pinpoint it.  Changing the $D9 to $D8 will cause the CoCo 3 to remain in regular speed and thus communicate at 57.6K.

Boisy G. Pitre
http://www.tee-boy.com/

On Jun 22, 2011, at 6:50 AM, Tom wrote:

> Using HBD-DOS 1.2 DW3 for CoCo3, is there a way to set the bitbanger serial
> port baud rate? Either with a poke or short BASIC program?
> 
> I want to try lower rates with a wireless connection I am experimenting
> with. The default 115.2k might be too fast, so I want to try 57.6k first to
> verify it works.
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco