[Coco] Glenside IDE Hard Drive Interface --- HOW-TO

Bob Devries devries.bob at gmail.com
Sun Nov 4 17:17:55 EST 2007


Randy,

>From that error report, I'd suggest that basic09 does not have enough memory 
for the size of the basic09 procedure file that you're trying to run.

load basic09 with extra memory, like this:

/d0/BASIC09 #16K

then proceed with loading the file as you describe.

--
Regards, Bob Devries, Dalby, Queensland, Australia

Isaiah 50:4 The sovereign Lord has given me
the capacity to be his spokesman,
so that I know how to help the weary.

website: http://www.home.gil.com.au/~bdevasl
my blog: http://bdevries.invigorated.org/

----- Original Message ----- 
From: "Randy Just" <randyjust at comcast.net>
To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
Sent: Monday, November 05, 2007 7:52 AM
Subject: Re: [Coco] Glenside IDE Hard Drive Interface --- HOW-TO


>
> 1347 ERROR #069
> 111A ERROR #069
> 10CF ERROR #069
> 0FF5 ERROR #069
> 0FBC ERROR #069
> ERROR #032
>
> The above are errors encountered when trying to load makedesc.b09 from a 
> floppy disk.  No files are
> being read from the hard drive at this time..  I am trying to get a boot 
> diskette set-up so I can format the
> hard drive.  At least I believe that is the process.  At this point I have 
> a virgin hard drive.
>
>
>
> At 01:41 PM 11/4/2007, you wrote:
>>Randy Just wrote:
>>><snip>
>>>I am working with the assumption I load BASIC09 (i.e. /d0/BASIC09) up 
>>>first and then do a
>>>load /d1/IDE2.1/makedesc.b09
>>>Doing the above results in errors.
>>><snip>
>>>Using idedetect.b09, the drive is detected, so I am assuming I am good 
>>>there.
>> ><snip>
>>
>>Whenever you are trying to get help with a problem, you must supply as 
>>much information as possible on the problem. So, what errors are you 
>>getting? The specific errors, number or text content, is crucial 
>>information.
>>
>>Your problem could be bad hardware, drive or interface. It could be 
>>software corruption, bad disk. It could be missing driver and descriptor, 
>>mismatched OS-9 boot file. The errors produced in attempting to load 
>>makedesc.b09 can help narrow down the choices. That idedetect.b09 works, 
>>does suggest as you mentioned that the hardware is good.
>>
>>Without more information, it seems strange that a required file to access 
>>the hard drive would be placed on the hard drive. That would be a 
>>"catch-22" situation. You ought to have access to makedesc.b09 from the 
>>same location as idedetect.b09.
>>
>>--
>>Coco mailing list
>>Coco at maltedmedia.com
>>http://five.pairlist.net/mailman/listinfo/coco
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco 




More information about the Coco mailing list