[Coco] cobbler'd disks

[mike delyea]

Ok, a few things for me to check, I'll let you know the results.

On 5/15/07, Christopher Hawks <chawks at dls.net> wrote:
>
> mike delyea wrote:
> > Here's whats on the screen
> >
> > KRel Boot Krn tb0..........................etc...............bKrnP2
> IOMan
> > Init RBF rb1773 DD D0 D1 D2
> > Rammer i2xot*j
> >
> > Then "FAILED" comes up under NITROS9 BOOT.  Please note that I have
> > tried it
> > without the ram disk also and it stops about the same place.  At this
> > point,
>
>         OK, starting with the i2xot*j at the end. 'i' try to link to
> 'Init'. '2'  try
> to link 'Krnp2'. 'o' try to open the console named in 'Init'. This fails
> so we
> go back to 'F$Boot' (prints the 'tb0..') This also fails so we go to
> Crash.
> Print a '*' and regb (the last error). 'j' is 106, plus 128 = 234 'Module
> Not
> Found'. Check to see that one of the 'Term' descriptors is uncommented in
> your
> script. You might also check your 'Init' module and verify that's the name
> of
> the console in it.
>
> --
> Christopher R. Hawks
> HAWKSoft
> ---------------------------------------------------------
> "No, the best way to prepare is to write programs, and to study great
> programs that other people have written.  In my case, I went to the
> garbage cans at the Computer Science Center and I fished out listings of
> their  operating system."
>         -- Bill Gates
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>