[Coco] Cave Walker on OS9 Level 2

[George's Coco Address]

I just tried it on my coco..
Booted with the original OS9-L2 disk and swapped in the Cave Walker disk,
Did do: chx /d0/cmds and chd /d0 and typed Cave. It worked.
 Rebooted, placed Cave Walker in /d1
Did do: chx /d1/cmds and chd /d1 and typed Cave. It worked

 My normal boot-up uses an 80 col /term and Cave will not work on that.

 I need to find a joystick and test it further. I want to try it on a VDG 
window next, to see if it will work on something other than /term but I 
can't remember how to create a VDG window.
 I remember there is a way. Does anyone know how to do this?


George


----- Original Message ----- 
From: "Brian" <bpa65117 at bigpond.net.au>
To: <coco at maltedmedia.com>
Sent: Tuesday, September 19, 2006 8:13 AM
Subject: [Coco] Cave Walker on OS9 Level 2


Hi David,

It's been awhile since I last loaded up Cave walker in OS-9 Lvl 2, But I'm 
sure you need VDGINT in the Boot modules, Which got me thinking, Does 
Nitros-9 come with VDGINT in the boot module.

And you should be able to load up Cave Walker , After booting up in 
Nitros-9,

only have to put Cave walker disk in Drive 0, type in
CHX /D0/CMDS
CHD /D0

then type in Cave, But you must have the VDGINT module in the Boot file, 
When Nitros-9 boots up, Does it boot up in the 32 column screen, Or is it 
setup for 80 Column. For it needs the 32 column screen to work.


laters

Briza

-- 
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco