[Coco] [Color Computer] setting up Nitros9 device descriptor for SCSI drive

[jlhickle]

Can anyone point me to some instructions for setting up a device
descriptor for a SCSI hard drive under nitros9?  I'm using cloud-9's
super driver. Hard drive has HDB-DOS virtual drives 0 thru 250 and I
want nitros9 to use the rest of the drive. Attempts to use device /s0
gives error 246 (device not ready).

I'm thinking the problem may be in how to tell nitros9 about
partitioning the drive.  I also have a Jaz drive (SCSI ID 4) which
works  with device /s4; didn't have to dmode any changes to that one.

-jim






Brought to you by the 6809, the 6803 and their cousins! 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ColorComputer/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ColorComputer/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:ColorComputer-digest at yahoogroups.com 
    mailto:ColorComputer-fullfeatured at yahoogroups.com

<*> To unsubscribe from this group, send an email to:
    ColorComputer-unsubscribe at yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/