[Coco] Disto SASI-SCSI to MFM, Corrected

Bruce W. Calkins brucecalkins at bellsouth.net
Sun Apr 23 13:49:40 EDT 2006


One used a 34 wire ribbon cable, split in the center, with the outside edges
moved to the outside of the 50 pin connector.  (Or was one side moved to one
pin short of the outside?)

According to the documentation I have, the Disto hard drive interface could
drive two Adaptec 4001A cards with two MFM drives each.  What was not in the
Disto documentation was the fact that the second Adaptec card needed a trace
cut to allow it to function as the second unit.  That bit of information is
in the Adaptec technical manual which I was fortunate enough to score one on
eBay.  Other SASI or SCSI-to-MFM cards may or may not have similar details.

Bruce W.


> ISTR the Disto was actually a SASI interface,
> I used one, and do remember that when making the cable
> there were a lot of the 50 pins not used, and I don't mean
> just the grounds either!
>
> --
> Frank Swygert




More information about the Coco mailing list