[Coco] Problems with Nitro Daily Build in Vcc and Windows10

[coco at jechar.ca]

In Vcc to use a drivewire disk do you need to boot from a BECKER image ?

On 2018-06-27 13:50, David Ladd wrote:
> The Becker disk images are to be mounted in DriveWire and then you use 
> the
> CoCo3FPGA, VCC, MAME, or XROAR to boot via a TCP connection between the
> emulator and the DriveWire server.
> 
> +-----------------------------------------------------------------------+
> | David Ladd a.k.a. PacoOtaktay a.k.a. Drencor                          
> |
> | YouTube: http://www.youtube.com/user/PacoOtaktay                      
> |
> | YouTube Gaming Live: https://gaming.youtube.com/user/PacoOtaktay/live 
> |
> | Websites: http://dwladd.com     &     http://www.theterrorzone.com    
> |
> | G+:  https://plus.google.com/113262444659438038657                    
> |
> | G+:  https://plus.google.com/+DavidLaddPacoOtaktay                    
> |
> |                                                                       
> |
> | Do you have your CoCo 3 yet?                                          
> |
> +-----------------------------------------------------------------------+
> 
> 
> On Wed, Jun 27, 2018 at 7:54 AM, <coco at jechar.ca> wrote:
> 
>> Sorry Bill, your reply was helpful.
>> 
>> My mistake was to think that the BECKER disks were the ones for the 
>> Vcc
>> Emulator, apparently just the standard coco floppy images are whats 
>> needed,
>> I don't understand what the BECKER disks are for if they will not boot
>> under Vcc then how can one do Drivewire with TCP/IP ?
>> 
>> If they were supposed to boot under Vcc then you have a bug otherwise 
>> it's
>> my understanding that's lacking. I have used drivewire quite a bit but
>> always with  a real coco attached through it's Bit Banger to a pc or 
>> pi.
>> 
>> 
>> 
>> On 2018-06-25 11:43, Bill Pierce via Coco wrote:
>> 
>>> Without knowing how your VCC is setup AND what disk you're using,
>>> there's no way of knowing what your problem is.
>>> Give a list of CPU, drives, drivewire, etc, etc and the FULL name of
>>> the disk you're trying and how you are booting (where the disk is
>>> mounted, cmds used, etc)
>>> 
>>> 
>>> 
>>> 
>>> 
>>> Bill Pierce
>>> "Charlie stole the handle, and the train it won't stop going, no way
>>> to slow down!" - Ian Anderson - Jethro Tull
>>> 
>>> My Music from the Tandy/Radio Shack Color Computer 2 & 3
>>> https://sites.google.com/site/dabarnstudio/
>>> Co-Contributor, Co-Editor for CocoPedia
>>> http://www.cocopedia.com/wiki/index.php/Main_Page
>>> 
>>> E-Mail: ooogalapasooo at aol.com
>>> 
>>> 
>>> 
>>> 
>>> 
>>> -----Original Message-----
>>> From: coco <coco at jechar.ca>
>>> To: Coco List <coco at maltedmedia.com>
>>> Cc: Coco List <coco at maltedmedia.com>
>>> Sent: Mon, Jun 25, 2018 9:06 am
>>> Subject: [Coco] Problems with Nitro Daily Build in Vcc and Windows10
>>> 
>>>   The Arcade pack boots but Nitro dsk will not.-- Coco mailing
>>> listCoco at maltedmedia.comhttps://pairlist5.pair.net/mailman/listinfo/coco
>>> 
>> 
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
>>