[Coco] Recommendations for a good monitor (RGB input) for CoCo 3?
bill at armchairarcade.com
Fri Apr 27 18:17:19 EDT 2018
Is there a purchase link somewhere for the CoCo 3 RGB to SCART adapter? I
have the CoCo 3's RGB hooked up to a Commodore 1084S (same RGB I use for
the C-128DCR), but it would be interesting to use the CoCo 3's RGB output
with my XRGB-mini, which would, besides allowing me to use it with an LCD,
also allow me to directly capture the output.
Bill Loguidice, Managing Director; Armchair Arcade, Inc.
Film <http://www.armchairarcade.com/film>; About me and other ways to get
in touch <http://about.me/billloguidice>
On Fri, Apr 27, 2018 at 5:48 PM, Steve Stroh <steve.stroh at gmail.com> wrote:
> At CoCoFEST! 2018 I saw the CoCo 3 RGB to SCART adapter, plus the SCART to
> HDMI adapter, and thought "well, that's a bit of overkill when you can just
> use the RGB output directly into a monitor with an RGB input".
> Aha... that's the gotcha with CoCo 3 RGB. Thanks! Armed with this info,
> I'll dig deeper into this.
> On Fri, Apr 27, 2018 at 1:56 PM Scott Wendt <malfunct at msn.com> wrote:
> > If that is the case I'd get one of the coco to SCART cables that are
> being built and a SCART to HDMI convertor and connect to nearly any modern
> > Finding an LCD that can sync the 15khz RGB signal from the coco would is
> hard if it is even possible.
> Steve Stroh (personal / general): stevestroh at gmail.com
> Coco mailing list
> Coco at maltedmedia.com
More information about the Coco