[Coco] NitrOS9 question

[Neal Crook]

Well, there are only 2 L2 platforms in the repository. Start with the CoCo
one if you think it will be easier... but don't come crying later!

On 29 Sep 2017 14:01, "Dave Philipsen" <dave at davebiz.com> wrote:

> I was afraid you were gonna say that! 😛
>
> Dave
>
> > On Sep 29, 2017, at 3:03 AM, Neal Crook <foofoobedoo at gmail.com> wrote:
> >
> > Dave,
> >
> > I recommend that you use my multicomp port as your starting - point.  I
> > also recommend that you do a L1 port first because it will provide an
> > easier debug path for and drivers you need. All the code is in the
> official
> > repository.
> >
> > Neal.
> >
> >> On 29 Sep 2017 05:48, "Dave Philipsen" <dave at davebiz.com> wrote:
> >>
> >> I have a question about NitrOS9 that I hope someone can help me with. I
> >> would like to attempt to port a version of Level 2 over to a new
> non-CoCo
> >> platform.  Essentially, I should be able to replicate the functionality
> of
> >> the CoCo MMU but I don’t want or need all of the gfx stuff that the
> CoCo 3
> >> has.  I would like to initially have it boot up with a shell on a serial
> >> port but I definitely want to have access to the full 512k via the
> MMU.  So
> >> that means I don’t need any of the CoCo keyboard stuff either.  Just
> >> accessing it via serial port(s).  What image is going to be the best to
> >> start with? Also, what are the ‘headless’ images?
> >>
> >>
> >> Dave
> >>
> >> --
> >> Coco mailing list
> >> Coco at maltedmedia.com
> >> https://pairlist5.pair.net/mailman/listinfo/coco
> >>
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > https://pairlist5.pair.net/mailman/listinfo/coco
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>